diff mbox series

[V3,2/3] test_plans/vm2vm_virtio_pmd_cbdma_test_plan: add vm2vm_virtio_pmd_cbdma testplan

Message ID 20220505064539.52606-1-weix.ling@intel.com (mailing list archive)
State Accepted
Headers show
Series add vm2vm_virtio_pmd_cbdma | expand

Commit Message

Ling, WeiX May 5, 2022, 6:45 a.m. UTC
v1:
As commit 53d3f4778c(vhost: integrate dmadev in asynchronous data-path),
add new testsuite vm2vm_virtio_pmd_cbdma for coverage the vm2vm
split ring and packed ring path test with cbdma.
1) Add new testplan test_plans/vm2vm_virtio_pmd_cbdma_test_plan into
   test_plans.

v2:
Modify the `Description` content in test_plan.

v3:
Fix WARNING info in test_plan.

Signed-off-by: Wei Ling <weix.ling@intel.com>
---
 .../vm2vm_virtio_pmd_cbdma_test_plan.rst      | 389 ++++++++++++++++++
 1 file changed, 389 insertions(+)
 create mode 100644 test_plans/vm2vm_virtio_pmd_cbdma_test_plan.rst
diff mbox series

Patch

diff --git a/test_plans/vm2vm_virtio_pmd_cbdma_test_plan.rst b/test_plans/vm2vm_virtio_pmd_cbdma_test_plan.rst
new file mode 100644
index 00000000..2690966a
--- /dev/null
+++ b/test_plans/vm2vm_virtio_pmd_cbdma_test_plan.rst
@@ -0,0 +1,389 @@ 
+.. Copyright (c) <2022>, Intel Corporation
+         All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+================================================
+vm2vm vhost-user/virtio-pmd with cbdma test plan
+================================================
+
+Description
+===========
+
+Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way.
+In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA
+channels and one DMA channel can be shared by multiple vrings at the same time. Vhost enqueue operation with CBDMA channels is supported
+in both split and packed ring.
+
+This document provides the test plan for testing some basic functions with CBDMA device in vm2vm vhost-user/virtio-pmd topology environment.
+1. vm2vm mergeable, normal path test with virtio 1.0 and virtio 1.1
+2. vm2vm mergeable path test with virtio 1.0 and dynamic change queue number.
+
+Note:
+1.For packed virtqueue virtio-net test, need qemu version > 4.2.0 and VM kernel version > 5.1, and packed ring multi-queues not support reconnect in qemu yet.
+2.For split virtqueue virtio-net with multi-queues server mode test, need qemu version >= 5.2.0, dut to old qemu exist reconnect issue when multi-queues test.
+3.When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may
+exceed IOMMU's max capability, better to use 1G guest hugepage.
+4.DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd.
+
+For more about dpdk-testpmd sample, please refer to the DPDK docments:
+https://doc.dpdk.org/guides/testpmd_app_ug/run_app.html
+For more about qemu, you can refer to the qemu doc: https://qemu-project.gitlab.io/qemu/system/invocation.html
+
+Prerequisites
+=============
+
+Topology
+--------
+      Test flow: Virtio-pmd-->Vhost-user-->Testpmd-->Vhost-user-->Virtio-pmd
+
+Software
+--------
+      Trex:http://trex-tgn.cisco.com/trex/release/v2.26.tar.gz
+
+General set up
+--------------
+1. Compile DPDK::
+
+      # CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=<dpdk build dir>
+      # ninja -C <dpdk build dir> -j 110
+      For example:
+      CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc
+      ninja -C x86_64-native-linuxapp-gcc -j 110
+
+2. Get the PCI device ID and DMA device ID of DUT, for example, 0000:18:00.0 is PCI device ID, 0000:00:04.0, 0000:00:04.1 is DMA device ID::
+
+      <dpdk dir># ./usertools/dpdk-devbind.py -s
+
+      Network devices using kernel driver
+      ===================================
+      0000:18:00.0 'Device 159b' if=ens785f0 drv=ice unused=vfio-pci
+
+      DMA devices using kernel driver
+      ===============================
+      0000:00:04.0 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci
+      0000:00:04.1 'Sky Lake-E CBDMA Registers 2021' drv=ioatdma unused=vfio-pci
+
+Test case
+=========
+
+Common steps
+------------
+1. Bind 1 NIC port and CBDMA channels to vfio-pci::
+
+      <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port pci device id>
+      <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port DMA device id>
+
+      For example, Bind 1 NIC port and 2 CBDMA channels::
+      <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:00:18.0
+      <dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:00:04.0,0000:00:04.1
+
+2. On VM1 and VM2, bind virtio device(for example,0000:00:05.0) with vfio-pci driver::
+
+    modprobe vfio
+    modprobe vfio-pci
+    echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+    <dpdk dir># ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+
+Test Case 1: VM2VM virtio-pmd split ring mergeable path 8 queues CBDMA enable with server mode stable test
+----------------------------------------------------------------------------------------------------------
+This case uses testpmd and QEMU to test split ring mergeable path with 8 queues and CBDMA enable with server mode,
+In VM, use testpmd to send imix packets, and relaunch vhost-user 10 times to test stable.
+
+1. Bind 16 CBDMA channels to vfio-pci, as common step 1.
+
+2. Launch the testpmd with 2 vhost port and 8 queues by below commands::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+    -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+    -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+    --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+    --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+    -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+    --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,\
+    lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+    testpmd> start
+
+3. Launch VM1 and VM2 using qemu::
+
+    taskset -c 6-16 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img  \
+    -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net0,server \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,\
+    mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+    taskset -c 17-27 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char0,path=./vhost-net1,server \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,\
+    vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+
+4. On VM1 and VM2, bind virtio device with vfio-pci driver, as common step 2.
+
+5. Launch testpmd in VM1::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip \
+    --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600 --rx-offloads=0x00002000
+    testpmd> set fwd mac
+    testpmd> start
+
+6. Launch testpmd in VM2, sent imix pkts from VM2::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip \
+    --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600 --rx-offloads=0x00002000
+    testpmd> set fwd mac
+    testpmd> set txpkts 64,256,512,1024,2000,64,256,512,1024,2000
+    testpmd> start tx_first 1
+
+7. Check imix packets can looped between two VMs and 8 queues all have packets rx/tx::
+
+    testpmd> show port stats all
+    testpmd> stop
+
+8. Relaunch and start vhost side testpmd with below cmd::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+    -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+    -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+    --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+    --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+    -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+    --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,\
+    lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+    testpmd> start
+
+9. Send pkts by testpmd in VM2, check imix packets can looped between two VMs and 8 queues all have packets rx/tx::
+
+    testpmd> stop
+    testpmd> start tx_first 1
+    testpmd> show port stats all
+    testpmd> stop
+
+10. Rerun step 7-8 for 10 times.
+
+Test Case 2: VM2VM virtio-pmd split ring mergeable path dynamic queue size CBDMA enable with server mode test
+-------------------------------------------------------------------------------------------------------------
+This case uses testpmd and QEMU to test split ring mergeable path and CBDMA enable with server mode,
+In VM, use testpmd to send imix packets, and then dynamic queue size from 4 to 8 to test it works well or not.
+
+1. Bind 16 CBDMA channels to vfio-pci, as common step 1.
+
+2. Launch the testpmd with 2 vhost ports below commands::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+    -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+    -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+    --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3]' \
+    --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3]' \
+    -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=4 --txq=4 \
+    --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,\
+    lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+    testpmd> start
+
+3. Launch VM1 and VM2 using qemu::
+
+    taskset -c 6-16 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img  \
+    -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net0,server \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,\
+    mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+    taskset -c 17-27 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char0,path=./vhost-net1,server \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,\
+    vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+
+4. On VM1 and VM2, bind virtio device with vfio-pci driver, as common step 2.
+
+5. Launch testpmd in VM1::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip \
+    --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600 --rx-offloads=0x00002000
+    testpmd> set fwd mac
+    testpmd> start
+
+6. Launch testpmd in VM2, sent imix pkts from VM2::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip \
+    --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600 --rx-offloads=0x00002000
+    testpmd> set fwd mac
+    testpmd> set txpkts 64,256,512,1024,2000,64,256,512,1024,2000
+    testpmd> start tx_first 1
+
+7. Check imix packets can looped between two VMs and  4 queues (queue0 to queue3) have packets rx/tx::
+
+    testpmd> show port stats all
+    testpmd> stop
+
+8. Relaunch and start vhost side testpmd with 8 queues::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+    -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+    -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+    --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+    --vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+    -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+    --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,\
+    lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+    testpmd> start
+
+9. Send pkts by testpmd in VM2, check imix packets can looped between two VMs and 8 queues all have packets rx/tx::
+
+    testpmd> stop
+    testpmd> start tx_first 1
+    testpmd> show port stats all
+    testpmd> stop
+
+10. Rerun step 7-8 for 10 times.
+
+Test Case 3: VM2VM virtio-pmd packed ring mergeable path 8 queues CBDMA enable test
+-----------------------------------------------------------------------------------
+This case uses testpmd and QEMU to test packed ring mergeable path with 8 queues and CBDMA enable,
+In VM, use testpmd to send imix packets, and then quit VM1 and change VM1 from packed ring path to splirt ring path to test.
+
+1. Bind 16 CBDMA channels to vfio-pci, as common step 1.
+
+2. Launch the testpmd with 2 vhost port and 8 queues by below commands::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost  \
+    -a 0000:00:04.0 -a 0000:00:04.1 -a 0000:00:04.2 -a 0000:00:04.3 -a 0000:00:04.4 -a 0000:00:04.5 -a 0000:00:04.6 -a 0000:00:04.7 \
+    -a 0000:80:04.0 -a 0000:80:04.1 -a 0000:80:04.2 -a 0000:80:04.3 -a 0000:80:04.4 -a 0000:80:04.5 -a 0000:80:04.6 -a 0000:80:04.7 \
+    --vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]' \
+    --vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7]'  \
+    -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+    --lcore-dma=[lcore2@0000:00:04.0,lcore2@0000:00:04.1,lcore2@0000:00:04.2,lcore2@0000:00:04.3,lcore3@0000:00:04.4,lcore3@0000:00:04.5,lcore3@0000:00:04.6,lcore3@0000:00:04.7,\
+    lcore4@0000:80:04.0,lcore4@0000:80:04.1,lcore4@0000:80:04.2,lcore4@0000:80:04.3,lcore5@0000:80:04.4,lcore5@0000:80:04.5,lcore5@0000:80:04.6,lcore5@0000:80:04.7]
+    testpmd> start
+
+3. Launch VM1 and VM2 with qemu::
+
+    taskset -c 6-16 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img  \
+    -chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net0 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,\
+    mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+    taskset -c 17-27 qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 9 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04-2.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+    -chardev socket,id=char0,path=./vhost-net1 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,\
+    vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+
+4. On VM1 and VM2, bind virtio device with vfio-pci driver, as common step 2.
+
+5. Launch testpmd in VM1::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip \
+    --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600 --rx-offloads=0x00002000
+    testpmd> set fwd mac
+    testpmd> start
+
+6. Launch testpmd in VM2, sent imix pkts from VM2::
+
+    <dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip \
+    --txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600 --rx-offloads=0x00002000
+    testpmd> set fwd mac
+    testpmd> set txpkts 64,256,512,1024,2000,64,256,512,1024,2000
+    testpmd> start tx_first 1
+
+7. Check imix packets can looped between two VMs and 8 queues all have packets rx/tx::
+
+    testpmd> show port stats all
+    testpmd> stop
+
+8. Quit VM2 and relaunch VM2 with split ring::
+
+    taskset -c 6-16 qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 9 -m 4096 \
+    -object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/huge,share=on \
+    -numa node,memdev=mem -mem-prealloc -drive file=/home/osimg/ubuntu20-04.img  \
+    -chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+    -device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+    -monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+    -netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+    -chardev socket,id=char0,path=./vhost-net0 \
+    -netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+    -device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,\
+    mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+9. Bind virtio device with vfio-pci driver::
+
+    modprobe vfio
+    modprobe vfio-pci
+    echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode
+    <dpdk dir># ./usertools/dpdk-devbind.py --force --bind=vfio-pci 0000:00:05.0
+
+10. Launch testpmd in VM2 and send imix pkts from VM2::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x3 -n 4 -- -i --tx-offloads=0x00 --enable-hw-vlan-strip \
+	--txq=8 --rxq=8 --txd=1024 --rxd=1024 --max-pkt-len=9600 --rx-offloads=0x00002000
+	testpmd> set fwd mac
+	testpmd> set txpkts 64,256,512,1024,2000,64,256,512,1024,2000
+
+11. Check imix packets can looped between two VMs and 8 queues all have packets rx/tx::
+
+	testpmd> show port stats all
+	testpmd> stop