diff --git a/test_plans/basic_4k_pages_dsa_test_plan.rst b/test_plans/basic_4k_pages_dsa_test_plan.rst
new file mode 100644
index 00000000..235fa5f4
--- /dev/null
+++ b/test_plans/basic_4k_pages_dsa_test_plan.rst
@@ -0,0 +1,1146 @@
+.. Copyright (c) <2022>, Intel Corporation
+   All rights reserved.
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+     notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+     notice, this list of conditions and the following disclaimer in
+     the documentation and/or other materials provided with the
+     distribution.
+
+   - Neither the name of Intel Corporation nor the names of its
+     contributors may be used to endorse or promote products derived
+     from this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+   FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+   COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+   INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+   (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+   SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+   STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+   OF THE POSSIBILITY OF SUCH DAMAGE.
+
+===============================================================
+vhost async operation with DSA driver using 4K-pages test plan
+===============================================================
+
+Description
+===========
+
+Vhost asynchronous data path leverages DMA devices to offload memory copies from the CPU and it is implemented in an asynchronous way.
+In addition, vhost supports M:N mapping between vrings and DMA virtual channels. Specifically, one vring can use multiple different DMA
+channels and one DMA channel can be shared by multiple vrings at the same time. Vhost enqueue operation with CBDMA channels is supported
+in both split and packed ring.
+
+This document provides the test plan for testing some basic functions when Vhost-user using asynchronous data path with
+DSA driver (kernel IDXD driver and DPDK vfio-pci driver) and using 4K-pages memory environment.
+1. test Vhost asynchronous data path with DSA driver in the PVP topology environment with testpmd.
+2. check Vhost tx offload function by verifing the TSO/cksum in the TCP/IP stack with vm2vm split ring and packed ring 
+vhost-user/virtio-net mergeable path.
+3.Check the payload of large packet (larger than 1MB) is valid after forwarding packets with vm2vm split ring
+and packed ring vhost-user/virtio-net mergeable and non-mergeable path.
+4. Multi-queues number dynamic change in vm2vm vhost-user/virtio-net with split ring and packed ring.
+5. Vhost-user using 1G hugepges and virtio-user using 4k-pages.
+
+DPDK 19.02 add support for using virtio-user without hugepages. The --no-huge mode was augmented to use memfd-backed
+memory (on systems that support memfd), to allow using virtio-user-based NICs without hugepages.
+
+Note:
+1. When DMA devices are bound to vfio driver, VA mode is the default and recommended. For PA mode, page by page mapping may
+exceed IOMMU's max capability, better to use 1G guest hugepage.
+2. DPDK local patch that about vhost pmd is needed when testing Vhost asynchronous data path with testpmd, and the suite has not yet been automated.
+
+Prerequisites
+=============
+
+General set up
+--------------
+1. Turn off transparent hugepage in grub by adding GRUB_CMDLINE_LINUX="transparent_hugepage=never".
+
+2. Compile DPDK::
+
+	# CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=<dpdk build dir>
+	# ninja -C <dpdk build dir> -j 110
+	For example,
+	CC=gcc meson --werror -Denable_kmods=True -Dlibdir=lib -Dexamples=all --default-library=x86_64-native-linuxapp-gcc
+	ninja -C x86_64-native-linuxapp-gcc -j 110
+
+3. Get the PCI device ID and DSA device ID of DUT, for example, 0000:4f:00.1 is PCI device ID, 0000:6a:01.0 - 0000:f6:01.0 are DSA device IDs::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -s
+
+	Network devices using kernel driver
+	===================================
+	0000:4f:00.1 'Ethernet Controller E810-C for QSFP 1592' drv=ice unused=vfio-pci
+
+	4DMA devices using kernel driver
+	4===============================
+	40000:6a:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+	40000:6f:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+	40000:74:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+	40000:79:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+	40000:e7:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+	40000:ec:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+	40000:f1:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+	40000:f6:01.0 'Device 0b25' drv=idxd unused=vfio-pci
+
+4. Prepare tmpfs with 4K-pages::
+
+	mkdir /mnt/tmpfs_4k
+	mkdir /mnt/tmpfs_4k_2
+	mount tmpfs /mnt/tmpfs_4k -t tmpfs -o size=4G
+	mount tmpfs /mnt/tmpfs_4k_2 -t tmpfs -o size=4G
+
+Test case
+=========
+
+Common steps
+------------
+1. Bind 1 NIC port to vfio-pci::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port pci device id>
+	For example:
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:00:4f.1
+
+2.Bind DSA devices to DPDK vfio-pci driver::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci <DUT port DSA device id>
+	For example, bind 2 DMA devices to vfio-pci driver:
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0
+
+.. note::
+
+	One DPDK DSA device can create 8 WQ at most. Below is an example, where DPDK DSA device will create one and
+	eight WQ for DSA deivce 0000:e7:01.0 and 0000:ec:01.0. The value of “max_queues” is 1~8:
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:e7:01.0,max_queues=1 -- -i
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 4 -n 4 -a 0000:ec:01.0,max_queues=8 -- -i
+
+3. Bind DSA devices to kernel idxd driver, and configure Work Queue (WQ)::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd <numDevices * 2>
+	<dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q <numWq>
+
+.. note::
+
+	Better to reset WQ when need operate DSA devices that bound to idxd drvier:
+	<dpdk dir># ./drivers/dma/idxd/dpdk_idxd_cfg.py --reset <numDevices * 2>
+	You can check it by 'ls /dev/dsa'
+	numDevices: number of devices, where 0<=numDevices<=7, corresponding to 0000:6a:01.0 - 0000:f6:01.0
+	numWq: Number of workqueues per DSA endpoint, where 1<=numWq<=8
+
+	For example, bind 2 DMA devices to idxd driver and configure WQ:
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+	<dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 1 0
+	<dpdk dir># ./<dpdk build dir>drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
+	Check WQ by 'ls /dev/dsa' and can find "wq0.0 wq2.0 wq2.1 wq2.2 wq2.3"
+
+Test Case 1: Basic test vhost/virtio-user split ring with 4K-pages and dsa dpdk driver
+----------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test split ring when vhost uses the asynchronous 
+enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.
+
+1. Bind one dsa device(6a:01.0) and one nic port(4f:00.1) to vfio-pci like common step 1-2.
+
+2. Launch vhost::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=1 \
+	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:6a:01.0-q0]
+	testpmd>set fwd mac
+	testpmd>start
+
+3. Launch virtio-user with 4K-pages::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,queues=1 -- -i
+	testpmd>set fwd mac
+	testpmd>start
+
+4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
+
+	testpmd>show port stats all
+
+Test Case 2: Basic test vhost/virtio-user packed ring with 4K-pages and dsa dpdk driver
+----------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring when vhost uses the asynchronous 
+enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.
+
+1. Bind one dsa device(6a:01.0) and one nic port(4f:00.1) to vfio-pci like common step 1-2.
+
+2. Launch vhost::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 -a 0000:6a:01.0,max_queues=4 \
+	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@0000:6a:01.0-q0]
+	testpmd>set fwd mac
+	testpmd>start
+
+3. Launch virtio-user with 4K-pages::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,packed_vq=1,queues=1 -- -i
+	testpmd>set fwd mac
+	testpmd>start
+
+4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
+
+	testpmd>show port stats all
+
+Test Case 3: PVP split ring multi-queues with 4K-pages and dsa dpdk driver
+-----------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test split ring multi-queues when vhost uses the asynchronous 
+enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.
+
+1. Bind 8 dsa device and one nic port to vfio-pci like common step 1-2::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 
+
+2. Launch vhost by below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --no-huge -m 1024 -a 0000:4f:00.1 -a 0000:6a:01.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6a:01.0-q7,lcore12@0000:6a:01.0-q1,lcore12@0000:6a:01.0-q2,lcore12@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q2,lcore13@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3,lcore14@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q3,lcore15@0000:6a:01.0-q4,lcore15@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q6,lcore15@0000:6a:01.0-q7]
+	testpmd>set fwd mac
+	testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+	testpmd>set fwd mac
+	testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+	testpmd>show port stats all
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log::
+
+	testpmd>stop
+
+6. restart vhost port and send imix pkts again, check get same throuhput as above::
+
+	testpmd>start
+	testpmd>show port stats all
+
+7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels with 1G hugepage::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:6f:01.0-q1,lcore14@0000:74:01.0-q2,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2]
+	testpmd>set fwd mac
+	testpmd>start
+
+8. Rerun step 3-5.
+
+Test Case 4: PVP packed ring multi-queues with 4K-pages and dsa dpdk driver
+------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring multi-queues when vhost uses the asynchronous 
+enqueue operations with dsa dpdk driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.
+
+1. Bind 8 dsa device and one nic port to vfio-pci like common step 1-2::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0 
+
+2. Launch vhost by below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 --no-huge -m 1024 -a 0000:4f:00.1 -a 0000:6a:01.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore11@0000:6a:01.0-q7,lcore12@0000:6a:01.0-q1,lcore12@0000:6a:01.0-q2,lcore12@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q2,lcore13@0000:6a:01.0-q3,lcore13@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q2,lcore14@0000:6a:01.0-q3,lcore14@0000:6a:01.0-q4,lcore14@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q0,lcore15@0000:6a:01.0-q1,lcore15@0000:6a:01.0-q2,lcore15@0000:6a:01.0-q3,lcore15@0000:6a:01.0-q4,lcore15@0000:6a:01.0-q5,lcore15@0000:6a:01.0-q6,lcore15@0000:6a:01.0-q7]
+	testpmd>set fwd mac
+	testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+	testpmd>set fwd mac
+	testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+	testpmd>show port stats all
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log::
+
+	testpmd>stop
+
+6. restart vhost port and send imix pkts again, check get same throuhput as above::
+
+	testpmd>start
+	testpmd>show port stats all
+
+7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels with 1G hugepage::::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+	--lcore-dma=[lcore11@0000:6a:01.0-q0,lcore12@0000:6a:01.0-q0,lcore13@0000:6f:01.0-q1,lcore13@0000:74:01.0-q2,lcore14@0000:6f:01.0-q1,lcore14@0000:74:01.0-q2,lcore15@0000:6f:01.0-q1,lcore15@0000:74:01.0-q2]
+	testpmd>set fwd mac
+	testpmd>start
+
+8. Rerun step 3-5.
+
+Test Case 5: VM2VM split ring vhost-user/virtio-net 4K-pages and dsa dpdk driver test with tcp traffic
+--------------------------------------------------------------------------------------------------------
+This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path 
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver 
+in 4k-pages environment.
+
+1. Bind 1 dsa device to vfio-pci like common step 2::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0
+
+2. Launch vhost by below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:6a:01.0,max_queues=2 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0],dma_ring_size=2048' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:6a:01.0-q0,lcore4@0000:6a:01.0-q1]
+	testpmd>start
+
+3. Launch VM1 and VM2::
+
+	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+	-chardev socket,id=char0,path=./vhost-net0 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+	-chardev socket,id=char0,path=./vhost-net1 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+	<VM1># ifconfig ens5 1.1.1.2
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+	<VM2># ifconfig ens5 1.1.1.8
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+	<VM1># iperf -s -i 1
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+
+6. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522::
+
+	testpmd>show port xstats all
+
+Test Case 6: VM2VM packed ring vhost-user/virtio-net 4K-pages and dsa dpdk driver test with tcp traffic
+---------------------------------------------------------------------------------------------------------
+This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path 
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver 
+in 4k-pages environment.
+
+1. Bind 1 dsa device to vfio-pci like common step 2::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0
+ 
+2. Launch vhost by below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost -a 0000:6a:01.0 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0],dma_ring_size=2048' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0],dma_ring_size=2048' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:6a:01.0-q0,lcore4@0000:6a:01.0-q1]
+	testpmd>start
+
+3. Launch VM1 and VM2::
+
+	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+	-chardev socket,id=char0,path=./vhost-net0 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+	-chardev socket,id=char0,path=./vhost-net1 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+3. On VM1, set virtio device IP and run arp protocal::
+
+	<VM1># ifconfig ens5 1.1.1.2
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+
+4. On VM2, set virtio device IP and run arp protocal::
+
+	<VM2># ifconfig ens5 1.1.1.8
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+
+5. Check the iperf performance between two VMs by below commands::
+
+	<VM1># iperf -s -i 1
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+
+6. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522::
+
+	testpmd>show port xstats all
+
+Test Case 7: vm2vm vhost/virtio-net split packed ring multi queues with 1G/4k-pages and dsa dpdk driver
+---------------------------------------------------------------------------------------------------------
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in 
+vm2vm vhost-user/virtio-net multi-queues mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk driver.
+And one virtio-net is split ring, the other is packed ring. The vhost run in 1G hugepages and the virtio-user run in 4k-pages environment.
+
+1. Bind 2 dsa channel to vfio-pci like common step 2::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+
+2. Launch vhost::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost -a 0000:6a:01.0 -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+	--lcore-dma=[lcore2@0000:6a:01.0-q0,lcore2@0000:6f:01.0-q1,lcore2@0000:74:01.0-q2,lcore2@0000:79:01.0-q3,lcore3@0000:6a:01.0-q0,lcore3@0000:74:01.0-q2,lcore3@0000:e7:01.0-q4,lcore3@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:6f:01.0-q1,lcore4@0000:79:01.0-q3,lcore4@0000:6a:01.0-q1,lcore4@0000:6f:01.0-q2,lcore4@0000:74:01.0-q3,lcore4@0000:79:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q6,lcore4@0000:f1:01.0-q7,lcore5@0000:f6:01.0-q0]
+	testpmd>start
+
+3. Launch VM qemu::
+
+	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+	-chardev socket,id=char0,path=./vhost-net0 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+	-chardev socket,id=char0,path=./vhost-net1 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+4. On VM1, set virtio device IP and run arp protocal::
+
+	<VM1># ethtool -L ens5 combined 8
+	<VM1># ifconfig ens5 1.1.1.2
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+
+5. On VM2, set virtio device IP and run arp protocal::
+
+	<VM2># ethtool -L ens5 combined 8
+	<VM2># ifconfig ens5 1.1.1.8
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+
+6. Scp 1MB file form VM1 to VM2::
+
+	<VM1># scp <file> root@1.1.1.8:/
+
+7. Check the iperf performance between two VMs by below commands::
+
+	<VM1># iperf -s -i 1
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+
+Test Case 8: Basic test vhost/virtio-user split ring with 4K-pages and dsa kernel driver
+----------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test split ring when vhost uses the asynchronous 
+enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.
+
+1. Bind one nic port to vfio-pci and one dsa device to idxd like common step 1 and 3::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+	#ls /dev/dsa,check wq configure, reset if exist
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py --reset 0
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+	ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 \
+	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@wq0.0]
+	testpmd>start
+
+3. Launch virtio-user with 4K-pages::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,queues=1 -- -i
+	testpmd>start
+
+4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
+
+	testpmd>show port stats all
+
+Test Case 9: Basic test vhost/virtio-user packed ring with 4K-pages and dsa dpdk driver
+----------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring when vhost uses the asynchronous 
+enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is 1:1 in 4k-pages environment.
+
+1. Bind one nic port to vfio-pci and one dsa device to idxd like common step 1 and 3::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+	#ls /dev/dsa,check wq configure, reset if exist
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py --reset 0
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+	ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 3-4 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:4f:00.1 \
+	--vdev 'net_vhost0,iface=/tmp/vhost-net,queues=1,dmas=[txq0]' -- -i --no-numa --socket-num=0 --lcore-dma=[lcore4@wq0.1]
+	testpmd>start
+
+3. Launch virtio-user with 4K-pages::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 5-6 -n 4 --no-huge -m 1024 --file-prefix=virtio-user \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/vhost-net,packed_vq=1,queues=1 -- -i
+	testpmd>start
+
+4. Send packet with packet generator with different packet size,includes [64, 128, 256, 512, 1024, 1518], check the throughput with below command::
+
+	testpmd>show port stats all
+
+Test Case 10: PVP split ring multi-queues with 4K-pages and dsa kernel driver
+--------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test split ring multi-queues when vhost uses the asynchronous 
+enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.
+
+1. Bind one nic port to vfio-pci and 8 dsa device to idxd like common step 1 and 3::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+	.ls /dev/dsa #check wq configure, reset if exist
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+	ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -m 1024 --no-huge -a 0000:4f:00.1 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore11@wq0.0,lcore11@wq0.7,lcore12@wq0.1,lcore12@wq0.2,lcore12@wq0.3,lcore13@wq0.2,lcore13@wq0.3,lcore13@wq0.4,lcore14@wq0.2,lcore14@wq0.3,lcore14@wq0.4,lcore14@wq0.5,lcore15@wq0.0,lcore15@wq0.1,lcore15@wq0.2,lcore15@wq0.3,lcore15@wq0.4,lcore15@wq0.5,lcore15@wq0.6,lcore15@wq0.7]
+	testpmd>set fwd mac
+	testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+	testpmd>set fwd mac
+	testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+	testpmd>show port stats all
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log::
+
+	testpmd>stop
+
+6. restart vhost port and send imix pkts again, check get same throuhput as above::
+
+	testpmd>start
+	testpmd>show port stats all
+
+7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -a 0000:4f:00.1 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+	--lcore-dma=[lcore11@wq0.0,lcore12@wq0.0,lcore13@wq0.1,lcore13@wq0.2,lcore14@wq0.1,lcore14@wq0.2,lcore15@wq0.1,lcore15@wq0.2]
+	testpmd>set fwd mac
+	testpmd>start
+
+8. Rerun step 4-6.
+
+Test Case 11: PVP packed ring multi-queues with 4K-pages and dsa kernel driver
+---------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test packed ring multi-queues when vhost uses the asynchronous
+enqueue operations with dsa kernel driver and the mapping between vrings and dsa virtual channels is M:N in 4k-pages environment.
+
+1. Bind one nic port to vfio-pci and 8 dsa device to idxd like common step 1 and 3::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+	.ls /dev/dsa #check wq configure, reset if exist
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+	ls /dev/dsa #check wq configure success
+
+2. Launch vhost by below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18 -m 1024 --no-huge -a 0000:4f:00.1 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3]' \
+	--iova=va -- -i --nb-cores=8 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore11@wq0.0,lcore12@wq2.1,lcore13@wq4.2,lcore14@wq6.3]
+	testpmd>set fwd mac
+	testpmd>start
+
+3. Launch virtio-user with inorder mergeable path::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \
+	-- -i --nb-cores=1 --txq=8 --rxq=8 --txd=1024 --rxd=1024
+	testpmd>set fwd mac
+	testpmd>start
+
+4. Send imix packets [64,1518] from packet generator, check the throughput can get expected data::
+
+	testpmd>show port stats all
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log::
+
+	testpmd>stop
+
+6. restart vhost port and send imix pkts again, check get same throuhput as above::
+
+	testpmd>start
+	testpmd>show port stats all
+
+7. Quit and relaunch vhost with diff M:N(M:1;M>N) mapping between vrings and dsa virtual channels::::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 10-18  -a 0000:4f:00.1 \
+	--file-prefix=vhost --vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq6;txq7]' \
+	--iova=va -- -i --nb-cores=5 --txd=1024 --rxd=1024 --txq=8 --rxq=8 \
+	--lcore-dma=[lcore11@wq0.0,lcore11@wq0.7,lcore12@wq0.1,lcore12@wq0.2,lcore12@wq0.3,lcore13@wq0.2,lcore13@wq0.3,lcore13@wq0.4,lcore14@wq0.2,lcore14@wq0.3,lcore14@wq0.4,lcore14@wq0.5,lcore15@wq0.0,lcore15@wq0.1,lcore15@wq0.2,lcore15@wq0.3,lcore15@wq0.4,lcore15@wq0.5,lcore15@wq0.6,lcore15@wq0.7]
+	testpmd>set fwd mac
+	testpmd>start
+
+8. Rerun step 4-6.
+
+Test Case 12: VM2VM split ring vhost-user/virtio-net 4K-pages and dsa kernel driver test with tcp traffic
+---------------------------------------------------------------------------------------------------------
+This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net split ring mergeable path
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver
+in 4k-pages environment.
+
+1. Bind 1 dsa device to idxd like common step 2::
+
+	ls /dev/dsa #check wq configure, reset if exist
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 0
+	ls /dev/dsa #check wq configure success
+
+2. Launch the Vhost sample by below commands::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --no-numa --socket-num=0 --lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore3@wq0.2,lcore3@wq0.3]
+	testpmd>start
+
+3. Launch VM1 and VM2 on socket 1::
+
+	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+	-chardev socket,id=char0,path=./vhost-net0 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+	-chardev socket,id=char0,path=./vhost-net1 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+
+4. On VM1, set virtio device IP and run arp protocal::
+
+	<VM1># ifconfig ens5 1.1.1.2
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+
+5. On VM2, set virtio device IP and run arp protocal::
+
+	<VM2># ifconfig ens5 1.1.1.8
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+
+6. Check the iperf performance between two VMs by below commands::
+
+	<VM1># iperf -s -i 1
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+
+7. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522::
+
+	testpmd>show port xstats all
+
+Test Case 13: VM2VM packed ring vhost-user/virtio-net 4K-pages and dsa kernel driver test with tcp traffic
+-----------------------------------------------------------------------------------------------------------
+This case test the function of Vhost tx offload in the topology of vhost-user/virtio-net packed ring mergeable path
+by verifing the TSO/cksum in the TCP/IP stack when vhost uses the asynchronous enqueue operations with dsa dpdk driver
+in 4k-pages environment.
+
+1. Bind 2 dsa device to idxd like common step 2::
+
+	ls /dev/dsa #check wq configure, reset if exist
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+	ls /dev/dsa #check wq configure success
+
+2. Launch the Vhost sample by below commands::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 2-4 -n 4 --no-huge -m 1024 --file-prefix=vhost \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=1,dmas=[txq0]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=1,dmas=[txq0]' \
+	--iova=va -- -i --nb-cores=2 --txd=1024 --rxd=1024 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore4@wq2.0]
+	testpmd>start
+
+3. Launch VM1 and VM2 with qemu::
+
+	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+	-chardev socket,id=char0,path=./vhost-net0 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :10
+
+	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+	-chardev socket,id=char0,path=./vhost-net1 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+4. On VM1, set virtio device IP and run arp protocal::
+
+	<VM1># ifconfig ens5 1.1.1.2
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+
+5. On VM2, set virtio device IP and run arp protocal::
+
+	<VM2># ifconfig ens5 1.1.1.8
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+
+6. Check the iperf performance between two VMs by below commands::
+
+	<VM1># iperf -s -i 1
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+
+7. Check that 2VMs can receive and send big packets to each other through vhost log. Port 0 should have tx packets above 1522, Port 1 should have rx packets above 1522::
+
+	testpmd>show port xstats all
+
+Test Case 14: vm2vm vhost/virtio-net split packed ring multi queues with 1G/4k-pages and dsa kernel driver
+-----------------------------------------------------------------------------------------------------------
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
+vm2vm vhost-user/virtio-net split and packed ring mergeable path when vhost uses the asynchronous enqueue operations with
+dsa kernel driver. The vhost run in 1G hugepages and the virtio-user run in 4k-pages environment.
+
+1. Bind 8 dsa device to idxd like common step 3::
+
+	ls /dev/dsa #check wq configure, reset if exist
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0 e7:01.0 ec:01.0 f1:01.0 f6:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 8
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 10
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 12
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 14
+	ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 --file-prefix=vhost \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=8,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=8,dmas=[txq1;txq2;txq3;txq4;txq5;txq6]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=8 --txq=8 \
+	--lcore-dma=[lcore2@wq0.0,lcore2@wq2.1,lcore2@wq4.2,lcore2@wq6.3,lcore3@wq0.0,lcore3@wq4.2,lcore3@wq8.4,lcore3@wq10.5,lcore3@wq12.6,lcore3@wq14.7,lcore4@wq2.1,lcore4@wq6.3,lcore4@wq0.1,lcore4@wq2.2,lcore4@wq4.3,lcore4@wq6.4,lcore4@wq8.5,lcore4@wq10.6,lcore4@wq12.7,lcore5@wq14.0]
+	testpmd>start
+
+3. Launch VM qemu::
+
+	taskset -c 32 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+	-chardev socket,id=char0,path=./vhost-net0 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on -vnc :10
+
+	taskset -c 33 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 1 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+	-chardev socket,id=char0,path=./vhost-net1 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=8 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,packed=on -vnc :12
+
+4. On VM1, set virtio device IP and run arp protocal::
+
+	<VM1># ethtool -L ens5 combined 8
+	<VM1># ifconfig ens5 1.1.1.2
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+
+5. On VM2, set virtio device IP and run arp protocal::
+
+	<VM2># ethtool -L ens5 combined 8
+	<VM2># ifconfig ens5 1.1.1.8
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+
+6. Scp 1MB file form VM1 to VM2::
+
+	<VM1># scp <file> root@1.1.1.8:/
+
+7. Check the iperf performance between two VMs by below commands::
+
+	<VM1># iperf -s -i 1
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+
+Test Case 15: PVP split and packed ring dynamic queue number test with dsa dpdk and kernel driver
+---------------------------------------------------------------------------------------------------
+This case uses testpmd and Traffic Generator(For example, Trex) to test split and packed ring when vhost uses the asynchronous enqueue operations
+with dsa dpdk and kernel driver and if the vhost-user can work well when the queue number dynamic change.
+
+1. bind 2 dsa device to idxd, 2 dsa device to vfio-pci and one nic port to vfio-pci like common step 1-3::
+
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 4f:00.1
+
+	ls /dev/dsa #check wq configure, reset if exist
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 2
+	ls /dev/dsa #check wq configure success
+
+2. Launch vhost::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 \
+	--vdev 'net_vhost0,iface=/tmp/s0,queues=2,client=1,dmas=[txq0;txq1]' \
+	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=2 --rxq=2 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore3@wq2.0]
+	testpmd>set fwd mac
+	testpmd>start
+
+3. Launch virtio-user with split ring mergeable in-order path by below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,queues=8,server=1 \
+	-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
+	testpmd>set fwd mac
+	testpmd>start
+
+4. Send imix packets from packet generator with random ip, check perforamnce can get target.
+
+5. Stop vhost port, check vhost RX and TX direction both exist packtes in 2 queues from vhost log.
+
+6. Quit and relaunch vhost as below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0 -a 0000:ec:01.0 \
+	--vdev 'net_vhost0,iface=/tmp/s0,queues=4,client=1,dmas=[txq0;txq1;txq2;txq3]' \
+	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=4 --rxq=4 --no-numa --socket-num=0 --lcore-dma=[lcore3@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q2,lcore3@0000:ec:01.0-q3]
+	testpmd>set fwd mac
+	testpmd>start
+
+7. Send imix packets from packet generator with random ip, check perforamnce can get target.
+
+8. Stop vhost port, check vhost RX and TX direction both exist packtes in 4 queues from vhost log.
+
+9. Quit and relaunch vhost as below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0 -a 0000:ec:01.0 \
+	--vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5]' \
+	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore3@wq2.0,lcore3@wq2.2,lcore3@0000:e7:01.0-q0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q3]
+	testpmd>set fwd mac
+	testpmd>start
+
+10. Send imix packets from packet generator with random ip, check perforamnce can get target.
+
+11. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
+
+12. Quit and relaunch vhost with diff cahnnels as below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 2-3 --no-huge -m 1024 --file-prefix=vhost -a 0000:4f:00.1 -a 0000:e7:01.0 -a 0000:ec:01.0 \
+	--vdev 'net_vhost0,iface=/tmp/s0,queues=8,client=1,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6]' \
+	--iova=va -- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8 --no-numa --socket-num=0 --lcore-dma=[lcore3@wq0.0,lcore3@wq0.1,lcore3@wq2.1,lcore3@wq2.0,lcore3@0000:e7:01.0-q1,lcore3@0000:ec:01.0-q3]
+	testpmd>set fwd mac
+	testpmd>start
+
+13. Send imix packets from packet generator with random ip, check perforamnce can get target.
+
+14. Stop vhost port, check vhost RX and TX direction both exist packtes in 8 queues from vhost log.
+
+15. Quit and relaunch virtio-user with packed ring mergeable in-order path by below command::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -n 4 -l 5-6 --no-huge -m 1024 --no-pci --file-prefix=virtio \
+	--vdev=net_virtio_user0,mac=00:01:02:03:04:05,path=/tmp/s0,mrg_rxbuf=1,in_order=1,packed_vq=1,queues=8,server=1 \
+	-- -i --nb-cores=1 --txd=1024 --rxd=1024 --txq=8 --rxq=8
+	testpmd>set fwd mac
+	testpmd>start
+
+16. Rerun steps 4-5.
+
+Test Case 16: VM2VM split ring vhost-user/virtio-net non-mergeable 4k-pages 16 queues dsa dpdk and kernel driver test with large packet payload valid check
+-------------------------------------------------------------------------------------------------------------------------------------------------------------
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
+vm2vm vhost-user/virtio-net split ring non-mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk
+and kernel driver. The dynamic change of multi-queues number also test.
+
+1. Bind 4 dsa device to vfio-pci and 4 dsa device to idxd like common step 2-3::
+
+	ls /dev/dsa #check wq configure, reset if exist
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 2
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 4
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 8 6
+	ls /dev/dsa #check wq configure success
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 0000:e7:01.0 0000:ec:01.0 0000:f1:01.0 0000:f6:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci 0000:e7:01.0 0000:ec:01.0 0000:f1:01.0 0000:f6:01.0
+
+2. Launch the Vhost sample by below commands::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost  \
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore2@0000:e7:01.0-q0,lcore2@0000:e7:01.0-q1,lcore2@0000:ec:01.0-q0,lcore2@0000:ec:01.0-q1,lcore3@wq0.0,lcore3@wq2.0,lcore4@0000:e7:01.0-q4,lcore4@0000:e7:01.0-q5,lcore4@0000:ec:01.0-q4,lcore4@0000:ec:01.0-q5,lcore5@wq4.1,lcore5@wq2.1]
+	testpmd>start
+
+3. Launch VM1 and VM2::
+
+	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+	-chardev socket,id=char0,path=./vhost-net0,server \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :10
+
+	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+	-chardev socket,id=char0,path=./vhost-net1,server \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=off,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on -vnc :12
+
+4. On VM1, set virtio device IP and run arp protocal::
+
+	<VM1># ethtool -L ens5 combined 16
+	<VM1># ifconfig ens5 1.1.1.2
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+
+5. On VM2, set virtio device IP and run arp protocal::
+
+	<VM2># ethtool -L ens5 combined 16
+	<VM2># ifconfig ens5 1.1.1.8
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+
+6. Scp 1MB file form VM1 to VM2::
+
+	<VM1># scp <file>> root@1.1.1.8:/
+
+7. Check the iperf performance between two VMs by below commands::
+
+	<VM1># iperf -s -i 1
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+
+8. Quit vhost ports and relaunch vhost ports w/ diff dsa channels::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:6f:01.0 -a 0000:74:01.0 -a 0000:79:01.0 -a 0000:e7:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+	--vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13]' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0 --lcore-dma=[lcore2@0000:e7:01.0-q2,lcore2@0000:f1:01.0-q3,lcore2@0000:f1:01.0-q1,lcore2@wq4.2,lcore3@wq6.1,lcore3@wq6.3,lcore4@0000:e7:01.0-q2,lcore4@0000:f6:01.0-q5,lcore4@wq4.2,lcore4@wq6.0,lcore5@wq4.2,lcore5@wq6.0]
+	testpmd>start
+
+9. rerun step 6-7.
+
+10. Quit vhost ports and relaunch vhost ports w/o dsa channels::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=16' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=16'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0
+	testpmd>start
+
+11. Rerun step 6-7.
+
+12. Quit vhost ports and relaunch vhost ports with 1 queues::
+
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost --vdev 'net_vhost0,iface=vhost-net0,client=1,queues=8' \
+	--vdev 'net_vhost1,iface=vhost-net1,client=1,queues=8'  -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=1 --txq=1 --no-numa --socket-num=0
+	testpmd>start
+
+13. On VM1, set virtio device::
+
+	<VM1># ethtool -L ens5 combined 1
+
+14. On VM2, set virtio device::
+
+	<VM2># ethtool -L ens5 combined 1
+
+15. Rerun step 5-6.
+
+Test Case 17: vm2vm packed ring vhost-user/virtio-net mergeable 16 queues dsa dpdk and kernel driver test with large packet payload valid check
+--------------------------------------------------------------------------------------------------------------------------------------------------
+This case uses iperf and scp to test the payload of large packet (larger than 1MB) is valid after packets forwarding in
+vm2vm vhost-user/virtio-net packed ring mergeable path when vhost uses the asynchronous enqueue operations with dsa dpdk
+and kernel driver. The dynamic change of multi-queues number also test.
+
+1. Bind 4 dsa device to vfio-pci and 4 dsa device to idxd like common step 2-3::
+
+	ls /dev/dsa #check wq configure, reset if exist
+	<dpdk dir># ./usertools/dpdk-devbind.py -b vfio-pci e7:01.0 ec:01.0 f1:01.0 f6:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -u 6a:01.0 6f:01.0 74:01.0 79:01.0
+	<dpdk dir># ./usertools/dpdk-devbind.py -b idxd 6a:01.0 6f:01.0 74:01.0 79:01.0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 0
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 2 2
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 4
+	<dpdk dir># ./<dpdk build dir>/drivers/dma/idxd/dpdk_idxd_cfg.py -q 4 6
+	ls /dev/dsa #check wq configure success
+
+2. Launch the Vhost sample by below commands::
+
+	rm -rf vhost-net*
+	<dpdk dir># ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-5 -n 4 -m 1024 --no-huge --file-prefix=vhost -a 0000:e7:01.0 -a 0000:ec:01.0 -a 0000:f1:01.0 -a 0000:f6:01.0 \
+	--vdev 'net_vhost0,iface=vhost-net0,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \
+	--vdev 'net_vhost1,iface=vhost-net1,queues=16,dmas=[txq0;txq1;txq2;txq3;txq4;txq5;txq6;txq7;txq8;txq9;txq10;txq11;txq12;txq13;txq14;txq15]' \
+	--iova=va -- -i --nb-cores=4 --txd=1024 --rxd=1024 --rxq=16 --txq=16 --no-numa --socket-num=0 \
+	--lcore-dma=[lcore2@wq0.0,lcore2@wq0.1,lcore2@wq2.0,lcore2@wq2.1,lcore3@wq0.1,lcore3@wq2.0,lcore3@0000:e7:01.0-q4,lcore3@0000:ec:01.0-q5,lcore3@0000:f1:01.0-q6,lcore3@0000:f6:01.0-q7,lcore4@0000:e7:01.0-q4,lcore4@0000:ec:01.0-q5,lcore4@0000:f1:01.0-q1,lcore4@wq2.0,lcore5@wq4.1,lcore5@wq2.0,lcore5@wq4.1,lcore5@wq6.2]
+	testpmd>start
+
+3. Launch VM1 and VM2 with qemu::
+
+	taskset -c 7 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm1 -enable-kvm -cpu host -smp 8 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04.img  \
+	-chardev socket,path=/tmp/vm1_qga0.sock,server,nowait,id=vm1_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm1_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm1_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6002-:22 \
+	-chardev socket,id=char0,path=./vhost-net0 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:01,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :10
+
+	taskset -c 8 /root/xingguang/qemu-6.2.0/bin/qemu-system-x86_64 -name vm2 -enable-kvm -cpu host -smp 8 -m 4096 \
+	-object memory-backend-file,id=mem,size=4096M,mem-path=/mnt/tmpfs_4k_2,share=on \
+	-numa node,memdev=mem -mem-prealloc -drive file=/root/xingguang/ubuntu20-04-2.img  \
+	-chardev socket,path=/tmp/vm2_qga0.sock,server,nowait,id=vm2_qga0 -device virtio-serial \
+	-device virtserialport,chardev=vm2_qga0,name=org.qemu.guest_agent.2 -daemonize \
+	-monitor unix:/tmp/vm2_monitor.sock,server,nowait -device e1000,netdev=nttsip1 \
+	-netdev user,id=nttsip1,hostfwd=tcp:127.0.0.1:6003-:22 \
+	-chardev socket,id=char0,path=./vhost-net1 \
+	-netdev type=vhost-user,id=netdev0,chardev=char0,vhostforce,queues=16 \
+	-device virtio-net-pci,netdev=netdev0,mac=52:54:00:00:00:02,disable-modern=false,mrg_rxbuf=on,mq=on,vectors=40,csum=on,guest_csum=on,host_tso4=on,guest_tso4=on,guest_ecn=on,guest_ufo=on,host_ufo=on,packed=on -vnc :12
+
+4. On VM1, set virtio device IP and run arp protocal::
+
+	<VM1># ethtool -L ens5 combined 16
+	<VM1># ifconfig ens5 1.1.1.2
+	<VM1># arp -s 1.1.1.8 52:54:00:00:00:02
+
+5. On VM2, set virtio device IP and run arp protocal::
+
+	<VM2># ethtool -L ens5 combined 16
+	<VM2># ifconfig ens5 1.1.1.8
+	<VM2># arp -s 1.1.1.2 52:54:00:00:00:01
+
+6. Scp 1MB file form VM1 to VM2::
+
+	<VM1># scp <file>> root@1.1.1.8:/
+
+7. Check the iperf performance between two VMs by below commands::
+
+	<VM1># iperf -s -i 1
+	<VM2># iperf -c 1.1.1.2 -i 1 -t 60
+
+8. Rerun step 6-7 five times.
