[V3,1/3] test_plans/vlan_ethertype_config: highlight check tpid point in test plan
Commit Message
Highlight check tpid point in test plan.
Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>
---
test_plans/vlan_ethertype_config_test_plan.rst | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
@@ -52,15 +52,19 @@ Test Case 2: test VLAN filtering on/off
testpmd> vlan set filter on 0
testpmd> start
-2. Send 1 packet with the VLAN Tag 16 on port ``A``,
+2. Send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``,
Verify that the VLAN packet cannot be received in port ``B``.
3. Disable vlan filtering on port ``0``::
testpmd> vlan set filter off 0
-4. Send 1 packet with the VLAN Tag 16 on port ``A``,
- Verify that the VLAN packet can be received in port ``B``.
+4. Change VLAN TPIDs to 0xA100 on port ``0``::
+
+ testpmd> vlan set outer tpid 0xA100 0
+
+5. Send 1 packet with VLAN TPID 0xA100 and VLAN Tag 16 on port ``A``,
+ Verify that the VLAN packet can be received in port ``B`` and TPID is 0xA100
Test Case 3: test adding VLAN Tag Identifier with changing VLAN TPID
====================================================================