diff --git a/dep/meter_and_policy_config.tar.gz b/dep/meter_and_policy_config.tar.gz
deleted file mode 100644
index f704aa425d2f21dbf9e7d18ee2f70a2f704551e6..0000000000000000000000000000000000000000
GIT binary patch
diff --git a/test_plans/index.rst b/test_plans/index.rst
index 570e1c35..dc782fdf 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -108,7 +108,6 @@ The following are the test plans for the DPDK DTS automated test system.
     loopback_virtio_user_server_mode_dsa_test_plan
     mac_filter_test_plan
     macsec_for_ixgbe_test_plan
-    metering_and_policing_test_plan
     mtu_update_test_plan
     multiple_pthread_test_plan
     ntb_test_plan
diff --git a/test_plans/metering_and_policing_test_plan.rst b/test_plans/metering_and_policing_test_plan.rst
deleted file mode 100644
index 67fb7f0f..00000000
--- a/test_plans/metering_and_policing_test_plan.rst
+++ /dev/null
@@ -1,914 +0,0 @@
-.. SPDX-License-Identifier: BSD-3-Clause
-   Copyright(c) 2015-2018 Intel Corporation
-
-=====================
-metering and policing
-=====================
-
-Description
------------
-The SoftNIC allows building custom NIC pipelines in SW. The Soft NIC pipeline
-is configurable through firmware (DPDK Packet Framework script).
-
-In RFC2698, the behavior of the Meter is specified as below:
-When a packet of size B bytes arrives at time t, the following
-happens if the trTCM is configured to operate:
-
-* in the Color-Blind mode:
-
-  * If Tp(t)-B < 0, the packet is red, else
-  * If Tc(t)-B < 0, the packet is yellow and Tp is decremented by B, else
-  * The packet is green and both Tp and Tc are decremented by B.
-
-* in the Color-Aware mode:
-
-  * If the packet has been precolored as red or if Tp(t)-B < 0, the packet is red, else
-  * If the packet has been precolored as yellow or if Tc(t)-B < 0, the packet is yellow and Tp is decremented by B, else
-  * The packet is green and both Tp and Tc are decremented by B.
-
-DPDK meter library (librte_meter) implements these two mode separately
-and made through different APIs. In table meter action implementation,
-always color aware mode API is invoked regardless of dscp table.
-
-Prerequisites
--------------
-The DUT must have four 10G Ethernet ports connected to four ports on
-Tester that are controlled by the Scapy packet generator,
-
-  ::
-
-    dut_port_0 <---> tester_port_0
-    dut_port_1 <---> tester_port_1
-    dut_port_2 <---> tester_port_2
-    dut_port_3 <---> tester_port_3
-
-Assume four DUT 10G Ethernet ports' pci device id is as the following,
-
-  ::
-
-    dut_port_0 : "0000:05:00.0"
-    dut_port_1 : "0000:05:00.1"
-    dut_port_2 : "0000:05:00.2"
-    dut_port_3 : "0000:05:00.3"
-
-Bind them to dpdk igb_uio driver,
-
-  ::
-
-    ./usertools/dpdk-devbind.py -b igb_uio 05:00.0 05:00.1
-
-1. change ./drivers/net/softnic/firmware.cli to meet the specific test environment.
-
-  ::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-    link LINK2 dev 0000:05:00.2
-    link LINK3 dev 0000:05:00.3
-
-    pipeline RX period 10 offset_port_id 0
-    pipeline RX port in bsz 32 link LINK0 rxq 0
-    pipeline RX port in bsz 32 link LINK1 rxq 0
-    pipeline RX port in bsz 32 link LINK2 rxq 0
-    pipeline RX port in bsz 32 link LINK3 rxq 0
-    pipeline RX port out bsz 32 swq RXQ0
-    pipeline RX port out bsz 32 swq RXQ1
-    pipeline RX port out bsz 32 swq RXQ2
-    pipeline RX port out bsz 32 swq RXQ3
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    ;pipeline RX table 0 dscp /root/dpdk/drivers/net/softnic/dscp_yellow.sh
-    pipeline RX port in 0 table 0
-    pipeline RX port in 1 table 0
-    pipeline RX port in 2 table 0
-    pipeline RX port in 3 table 0
-    flowapi map group 0 ingress pipeline RX table 0
-
-    pipeline TX period 10 offset_port_id 0
-    pipeline TX port in bsz 32 swq TXQ0
-    pipeline TX port in bsz 32 swq TXQ1
-    pipeline TX port in bsz 32 swq TXQ2
-    pipeline TX port in bsz 32 swq TXQ3
-    pipeline TX port out bsz 32 link LINK0 txq 0
-    pipeline TX port out bsz 32 link LINK1 txq 0
-    pipeline TX port out bsz 32 link LINK2 txq 0
-    pipeline TX port out bsz 32 link LINK3 txq 0
-    pipeline TX table match stub
-    pipeline TX table match stub
-    pipeline TX table match stub
-    pipeline TX table match stub
-
-    pipeline TX port in 0 table 0
-    pipeline TX port in 1 table 1
-    pipeline TX port in 2 table 2
-    pipeline TX port in 3 table 3
-    pipeline TX table 0 rule add match default action fwd port 0
-    pipeline TX table 1 rule add match default action fwd port 1
-    pipeline TX table 2 rule add match default action fwd port 2
-    pipeline TX table 3 rule add match default action fwd port 3
-
-    thread 4 pipeline RX enable
-    thread 4 pipeline TX enable
-
-2. start softnic with following command line,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 \
-    --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli' \
-    -- -i --portmask=0x10 --disable-rss
-    testpmd> start
-
-3. start softnic with default hierarchy Qos with following command line,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 \
-    --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli' \
-    -- -i --portmask=0x10 --disable-rss
-    testpmd> set port tm hierarchy default 1
-    testpmd> start
-
-Test Case 1: ipv4 ACL table RFC2698 GYR
----------------------------------------
-1. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  a. send a packet larger than PBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-
-  The packet was forwarded to port 0.
-
-  b. send a packet not larger than PBS but larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-
-  The packet was forwarded to port 0.
-
-  c. send a packet not larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  The packet was forwarded to port 0.
-
-**Notes**: the CBS/PBS includes IP header(20 bytes) and TCP header(20 bytes).
-So when the payload is 460 bytes, the IP packet is 500 bytes.
-
-
-Test Case 2: ipv4 ACL table RFC2698 GYD
----------------------------------------
-1. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions color type yellow / end r_actions drop / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  a. send a packet larger than PBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-
-  The packet was dropped.
-
-  b. send a packet not larger than PBS but larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-
-  The packet was forwarded to port 0.
-
-
-  c. send a packet not larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  The packet was forwarded to port 0.
-
-Test Case 3: ipv4 ACL table RFC2698 GDR
----------------------------------------
-1. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
- ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions drop / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 132 / sctp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 1 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and SCTP dport/sport.
-
-  a. send a packet larger than PBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=132)/SCTP(sport=2,dport=2)/Raw(load="P"*469)], iface="enp131s0f3")
-
-  The packet was forwarded to port 1.
-
-  b. send a packet not larger than PBS but larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=132)/SCTP(sport=2,dport=2)/Raw(load="P"*468)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=132)/SCTP(sport=2,dport=2)/Raw(load="P"*369)], iface="enp131s0f3")
-
-  The packets was dropped.
-
-  c. send a packet not larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=132)/SCTP(sport=2,dport=2)/Raw(load="P"*368)], iface="enp131s0f3")
-
-  The packet was forwarded to port 1.
-
-**Notes**: the CBS/PBS includes IP header(20 bytes) and SCTP header(12 bytes).
-So when the payload is 468 bytes, the IP packet is 500 bytes.
-
-Test Case 4: ipv4 ACL table RFC2698 DYR
----------------------------------------
-1. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter policy 2 0 g_actions drop / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 17 / udp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  a. send a packet larger than PBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=17)/UDP(sport=2,dport=2)/Raw(load="P"*473)], iface="enp131s0f3")
-
-  The packet was forwarded to port 0.
-
-  b. send a packet not larger than PBS but larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=17)/UDP(sport=2,dport=2)/Raw(load="P"*373)], iface="enp131s0f3")
-
-  The packet was forwarded to port 0.
-
-  c. send a packet not larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=17)/UDP(sport=2,dport=2)/Raw(load="P"*372)], iface="enp131s0f3")
-
-  The packet was dropped.
-
-**Notes**: the CBS/PBS includes IP header(20 bytes) and UDP header(8 bytes).
-So when the payload is 472 bytes, the IP packet is 500 bytes.
-
-Test Case 5: ipv4 ACL table RFC2698 DDD
----------------------------------------
-1. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter policy 2 0 g_actions drop / end y_actions drop / end r_actions drop / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  a. send a packet larger than PBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-
-  The packet was dropped.
-
-  b. send a packet not larger than PBS but larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-
-  The packet was dropped.
-
-  c. send a packet not larger than CBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  The packet was dropped.
-
-Test Case 6: ipv4 with same CBS and PBS GDR
--------------------------------------------
-1. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 500 500 0
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions drop / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  a. send a packet larger than PBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-
-  The packet was forwarded to port 0.
-
-  b. send a packet not larger than PBS
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-
-  The packet was forwarded to port 0.
-
-Test Case 7: ipv4 HASH table RFC2698
-------------------------------------
-1. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 65K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table,
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    a)GYR
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    b)GYD
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions color type yellow / end r_actions drop / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    c)GDR
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions drop / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    d)DYR
-    testpmd> add port meter policy 2 0 g_actions drop / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    e)DDD
-    testpmd> add port meter policy 2 0 g_actions drop / end y_actions drop / end r_actions drop / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport. Send packets same as ACL table, there will be the same result with ACL table.
-
-Test Case 8: ipv6 ACL table RFC2698
------------------------------------
-1. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
-  ::
-
-    table action profile AP0 ipv6 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv6 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table,
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions color type yellow / end r_actions drop / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> add port meter policy 2 1 g_actions drop / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 1 0 1 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:5789 dst spec 0:0:0:0:0:0:0:0 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:5789 dst spec 0:0:0:0:0:0:0:0 proto spec 17 / udp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 1 / queue index 1 / end
-    testpmd> start
-    testpmd> flow list 2
-    ID      Group   Prio    Attr    Rule
-    0       0       0       i--     ETH IPV6 TCP => METER QUEUE
-    1       0       0       i--     ETH IPV6 UDP => METER QUEUE
-
-3. Configure the packets with specified src/dst IPv6 address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",dst="2001::1",nh=6)/TCP(sport=2,dport=2)/Raw(load="P"*441)], iface="enp131s0f3")
-    The packet was dropped.
-    sendp([Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",dst="2001::1",nh=6)/TCP(sport=2,dport=2)/Raw(load="P"*440)], iface="enp131s0f3")
-    The packet was forwarded to port 0.
-    sendp([Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",dst="2001::1",nh=6)/TCP(sport=2,dport=2)/Raw(load="P"*340)], iface="enp131s0f3")
-    The packet was forwarded to port 0.
-    sendp([Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",dst="2001::1",nh=17)/UDP(sport=2,dport=2)/Raw(load="P"*453)], iface="enp131s0f3")
-    The packet was forwarded to port 1.
-    sendp([Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",dst="2001::1",nh=17)/UDP(sport=2,dport=2)/Raw(load="P"*353)], iface="enp131s0f3")
-    The packet was forwarded to port 1.
-    sendp([Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",dst="2001::1",nh=17)/UDP(sport=2,dport=2)/Raw(load="P"*352)], iface="enp131s0f3")
-    The packet was dropped.
-
-**Notes**: TCP header covers 20 bytes, UDP header covers 8 bytes.
-The CBS/PBS includes IPv6 header(40 bytes) and TCP/UDP header(20/8 bytes).
-So when the payload of IPv6-TCP packet is 440 bytes, the IPv6 packet is 500 bytes.
-When the payload of IPv6-UDP packet is 452 bytes, the IPv6 packet is 500 bytes.
-
-Test Case 9: multiple meter and profile
----------------------------------------
-1. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic, configure 4 ports,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=4 --txq=4 --portmask=0x10 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 4 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter profile trtcm_rfc2698 4 1 3125000000 3125000000 300 400 0
-    testpmd> add port meter policy 4 0 g_actions color type green / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 4 0 0 0 yes 0 0 0
-    testpmd> add port meter policy 4 1 g_actions color type green / end y_actions color type yellow / end r_actions drop / end
-    testpmd> create port meter 4 1 0 1 yes 0 0 0
-    testpmd> add port meter policy 4 2 g_actions color type green / end y_actions drop / end r_actions color type red / end
-    testpmd> create port meter 4 2 0 2 yes 0 0 0
-    testpmd> add port meter policy 4 3 g_actions drop / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 4 3 0 3 yes 0 0 0
-    testpmd> add port meter policy 4 4 g_actions color type green / end y_actions color type yellow / end r_actions drop / end
-    testpmd> create port meter 4 4 1 4 yes 0 0 0
-    testpmd> add port meter policy 4 5 g_actions color type green / end y_actions drop / end r_actions color type red / end
-    testpmd> create port meter 4 5 1 5 yes 0 0 0
-    testpmd> add port meter policy 4 6 g_actions drop / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 4 6 1 6 yes 0 0 0
-    testpmd> add port meter policy 4 7 g_actions drop / end y_actions drop / end r_actions drop / end
-    testpmd> create port meter 4 7 1 7 yes 0 0 0
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 0 dst spec 0 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 1 dst spec 1 / end actions meter mtr_id 1 / queue index 1 / end
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 2 / queue index 2 / end
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 3 dst spec 3 / end actions meter mtr_id 3 / queue index 3 / end
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 4 dst spec 4 / end actions meter mtr_id 4 / queue index 0 / end
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 5 dst spec 5 / end actions meter mtr_id 5 / queue index 1 / end
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 6 dst spec 6 / end actions meter mtr_id 6 / queue index 2 / end
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 7 dst spec 7 / end actions meter mtr_id 128 / queue index 3 / end
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 8 dst spec 8 / end actions meter mtr_id 128 / queue index 0 / end
-    the last flow can't be created successfully with "METER: Meter already attached to a flow: Invalid argument"
-    testpmd> start
-    testpmd> flow list 4
-    ID      Group   Prio    Attr    Rule
-    0       0       0       i--     ETH IPV4 TCP => METER QUEUE
-    1       0       0       i--     ETH IPV4 TCP => METER QUEUE
-    2       0       0       i--     ETH IPV4 TCP => METER QUEUE
-    3       0       0       i--     ETH IPV4 TCP => METER QUEUE
-    4       0       0       i--     ETH IPV4 TCP => METER QUEUE
-    5       0       0       i--     ETH IPV4 TCP => METER QUEUE
-    6       0       0       i--     ETH IPV4 TCP => METER QUEUE
-    7       0       0       i--     ETH IPV4 TCP => METER QUEUE
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    pkt1: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=0,dport=0)/Raw(load="P"*461)], iface="enp131s0f3")
-    pkt2: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=0,dport=0)/Raw(load="P"*460)], iface="enp131s0f3")
-    pkt3: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=0,dport=0)/Raw(load="P"*360)], iface="enp131s0f3")
-    pkt1/2/3 were forwarded to port 0
-    pkt4: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=1,dport=1)/Raw(load="P"*461)], iface="enp131s0f3")
-    pkt5: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=1,dport=1)/Raw(load="P"*460)], iface="enp131s0f3")
-    pkt6: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=1,dport=1)/Raw(load="P"*360)], iface="enp131s0f3")
-    pkt4 was dropped, pkt5/6 were forwarded to port1
-    pkt7: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    pkt8: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    pkt9: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*361)], iface="enp131s0f3")
-    pkt10: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-    pkt8/9 were dropped, pkt7/10 were forwarded to port2
-    pkt11: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=3,dport=3)/Raw(load="P"*461)], iface="enp131s0f3")
-    pkt12: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=3,dport=3)/Raw(load="P"*361)], iface="enp131s0f3")
-    pkt13: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=3,dport=3)/Raw(load="P"*360)], iface="enp131s0f3")
-    pkt13 was dropped, pkt11/12 were forwarded to port3
-    pkt14: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=4,dport=4)/Raw(load="P"*361)], iface="enp131s0f3")
-    pkt15: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=4,dport=4)/Raw(load="P"*360)], iface="enp131s0f3")
-    pkt16: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=4,dport=4)/Raw(load="P"*260)], iface="enp131s0f3")
-    pkt14 was dropped, pkt15/16 were forwarded to port0
-    pkt17: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=5,dport=5)/Raw(load="P"*361)], iface="enp131s0f3")
-    pkt18: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=5,dport=5)/Raw(load="P"*360)], iface="enp131s0f3")
-    pkt19: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=5,dport=5)/Raw(load="P"*261)], iface="enp131s0f3")
-    pkt20: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=5,dport=5)/Raw(load="P"*260)], iface="enp131s0f3")
-    pkt18/19 were dropped, pkt17/20 were forwarded to port1
-    pkt21: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=6,dport=6)/Raw(load="P"*361)], iface="enp131s0f3")
-    pkt22: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=6,dport=6)/Raw(load="P"*261)], iface="enp131s0f3")
-    pkt23: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=6,dport=6)/Raw(load="P"*260)], iface="enp131s0f3")
-    pkt23 was dropped, pkt21/22 were forwarded to port2
-    pkt24: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=7,dport=7)/Raw(load="P"*361)], iface="enp131s0f3")
-    pkt25: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=7,dport=7)/Raw(load="P"*261)], iface="enp131s0f3")
-    pkt26: sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=7,dport=7)/Raw(load="P"*260)], iface="enp131s0f3")
-    pkt24/25/26 were dropped
-
-**Notes**: if create one flow with a mtr_id, then create the flow again with another mtr_id,
-the last flow rule will overlap the previous one.
-so the first flow rule will not take effect, just the last one can take effect.
-
-Test Case 10: ipv4 RFC2698 pre-colored red by DSCP table
---------------------------------------------------------
-1. Set the DSCP table in dscp.sh, set all the packets from every tc and every queue to red color. Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    pipeline RX table 0 dscp /root/dpdk/drivers/net/softnic/dscp_red.sh
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  All the packets were forwarded to port 0.
-
-4. Create another meter to drop all the packets with red color,
-
-  ::
-
-    testpmd> add port meter policy 2 1 g_actions color type green / end y_actions color type yellow / end r_actions drop / end
-    testpmd> create port meter 2 1 0 1 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 1 / queue index 0 / end
-
-5. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  All the packets were dropped.
-
-6. Create another meter to drop all the packets with yellow color,
-
-  ::
-
-    testpmd> add port meter policy 2 2 g_actions color type green / end y_actions drop / end r_actions color type red / end
-    testpmd> create port meter 2 2 0 2 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 2 / queue index 0 / end
-
-7. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  All the packets were forwarded to port 0
-
-8. Create another meter to drop all the packets with green color,
-
-  ::
-
-    testpmd> add port meter policy 2 3 g_actions drop / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 3 0 3 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 3 / queue index 0 / end
-
-9. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  All the packets were forwarded to port 0
-
-Test Case 11: ipv4 RFC2698 pre-colored yellow by DSCP table
------------------------------------------------------------
-1. Set the DSCP table in dscp.sh, set all the packets from every tc and every queue to yellow color.
-
-  Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    pipeline RX table 0 dscp /root/dpdk/drivers/net/softnic/dscp_yellow.sh
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  All the packets were forwarded to port 0.
-
-4. Create another meter to drop all the packets with red color,
-
-  ::
-
-    testpmd> add port meter policy 2 1 g_actions color type green / end y_actions color type yellow / end r_actions drop / end
-    testpmd> create port meter 2 1 0 1 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 1 / queue index 0 / end
-
-5. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  pkt1 was dropped.
-  pkt2 and pkt3 were forwarded to port 0.
-
-6. Create another meter to drop all the packets with yellow color,
-
-  ::
-
-    testpmd> add port meter policy 2 2 g_actions color type green / end y_actions drop / end r_actions color type red / end
-    testpmd> create port meter 2 2 0 2 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 2 / queue index 0 / end
-
-7. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  pkt1 was forwarded to port 0.
-  pkt2 and pkt3 were dropped.
-
-8. Create another meter to drop all the packets with green color,
-
-  ::
-
-    testpmd> add port meter policy 2 3 g_actions drop / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 3 0 3 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 3 / queue index 0 / end
-
-9. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  All the packets were forwarded to port 0
-
-Test Case 12: ipv4 RFC2698 pre-colored green by DSCP table
-----------------------------------------------------------
-1. Set the DSCP table in dscp.sh, set all the packets from every tc and every queue to green color.
-
-  Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,
-  ::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    pipeline RX table 0 dscp /root/dpdk/drivers/net/softnic/dscp_green.sh
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic,
-
-  ::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0,firmware=/root/dpdk/drivers/net/softnic/meter_and_policing_firmware.cli' -- -i --rxq=2 --txq=2 --portmask=0x4 --disable-rss
-
-  Add rules to table, set CBS to 400 bytes, PBS to 500 bytes
-  ::
-
-    testpmd> add port meter profile trtcm_rfc2698 2 0 3125000000 3125000000 400 500 0
-    testpmd> add port meter policy 2 0 g_actions color type green / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 0 0 0 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 0 / queue index 0 / end
-    testpmd> start
-
-3. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  All the packets were forwarded to port 0.
-
-4. Create another meter to drop all the packets with red color,
-
-  ::
-
-    testpmd> add port meter policy 2 1 g_actions color type green / end y_actions color type yellow / end r_actions drop / end
-    testpmd> create port meter 2 1 0 1 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 1 / queue index 0 / end
-
-5. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  pkt1 was dropped.
-  pkt2 and pkt3 were forwarded to port 0.
-
-6. Create another meter to drop all the packets with yellow color,
-
-  ::
-
-    testpmd> add port meter policy 2 2 g_actions color type green / end y_actions drop / end r_actions color type red / end
-    testpmd> create port meter 2 2 0 2 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 2 / queue index 0 / end
-
-7. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  pkt1 and pkt3 were forwarded to port 0.
-  pkt2 was dropped.
-
-8. Create another meter to drop all the packets with green color,
-
-  ::
-
-    testpmd> add port meter policy 2 3 g_actions drop / end y_actions color type yellow / end r_actions color type red / end
-    testpmd> create port meter 2 3 0 3 yes 0 0 0
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.12 dst spec 2.20.21.22 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 2 dst spec 2 / end actions meter mtr_id 3 / queue index 0 / end
-
-9. Configure the packets with specified src/dst IP address and TCP dport/sport.
-
-  ::
-
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*461)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*460)], iface="enp131s0f3")
-    sendp([Ether(dst="00:00:00:00:01:00")/IP(src='1.10.11.12',dst='2.20.21.22',proto=6)/TCP(sport=2,dport=2)/Raw(load="P"*360)], iface="enp131s0f3")
-
-  pkt1 and pkt2 were forwarded to port 0.
-  pkt3 was dropped.
-
-Test Case 13: ipv4 RFC2698 pre-colored by default DSCP table
-------------------------------------------------------------
-1. Set the DSCP table in dscp.sh,
-
-  The default DSCP table translate all input packets dscp values (0...64) to 0 0 0
-  which means traffic class 0, queue id 0 , color 0 (i.e green).
-
-  Edit meter_and_policing_firmware.cli to change "table action" and "pipeline table" as below,::
-
-    table action profile AP0 ipv4 offset 270 fwd meter trtcm tc 1 stats pkts
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    pipeline RX table 0 dscp /root/dpdk/drivers/net/softnic/dscp_default.sh
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Execute the steps2-9 of the case pre-colored green by DSCP table, got the same result.
diff --git a/tests/TestSuite_metering_and_policing.py b/tests/TestSuite_metering_and_policing.py
deleted file mode 100644
index 02a83181..00000000
--- a/tests/TestSuite_metering_and_policing.py
+++ /dev/null
@@ -1,1296 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2019 Intel Corporation
-#
-
-"""
-DPDK Test suite.
-Test metering_and_policing.
-"""
-
-import os
-import re
-import string
-import time
-
-import framework.utils as utils
-from framework.dut import Dut
-from framework.plotting import Plotting
-from framework.pmd_output import PmdOutput
-from framework.settings import HEADER_SIZE
-from framework.test_case import TestCase
-
-
-class TestMeteringAndPolicing(TestCase):
-    scapyCmds = []
-
-    def start_scapy(self):
-        self.tester.scapy_foreground()
-        self.tester.send_expect("scapy", ">>> ", 10)
-        self.scapy_status = True
-
-    def end_scapy(self):
-        self.tester.send_expect("exit()", "#")
-        self.scapy_status = False
-
-    def scapy_execute(self, timeout=60):
-        for cmd in self.scapyCmds:
-            self.tester.send_expect(cmd, ">>> ", timeout)
-
-        self.scapyCmds = []
-
-    def copy_config_files_to_dut(self):
-        """
-        Copy firmware.cli, dscp_*.sh from tester to DUT.
-        """
-        file = "meter_and_policy_config.tar.gz"
-        src_file = r"./dep/%s" % file
-        dst1 = "/tmp"
-        dst2 = os.sep.join([self.target_dir, "drivers/net/softnic"])
-        self.dut.session.copy_file_to(src_file, dst1)
-        self.dut.send_expect("tar xf %s/%s -C %s" % (dst1, file, dst2), "#", 30)
-
-    def update_firmware_cli(self, caseID):
-        """
-        Update firmware.cli.
-        """
-        self.ori_firmware_cli = os.sep.join(
-            [self.target_dir, "drivers/net/softnic/meter_and_policing_firmware.cli"]
-        )
-
-        if len(self.dut_ports) == 4:
-            self.ori_firmware_cli = os.sep.join(
-                [
-                    self.target_dir,
-                    "drivers/net/softnic/meter_and_policing_firmware_4ports.cli",
-                ]
-            )
-        self.new_firmware_cli = "%s-%s" % (self.ori_firmware_cli, caseID)
-        self.dut.send_expect("rm -f %s" % self.new_firmware_cli, "#")
-        self.dut.send_expect(
-            "cp %s %s" % (self.ori_firmware_cli, self.new_firmware_cli), "#"
-        )
-
-        # link dev
-        self.dut.send_expect(
-            "sed -i -e 's/^.*link LINK0 dev.*$/link LINK0 dev %s/g' %s"
-            % (self.dut_p0_pci, self.new_firmware_cli),
-            "#",
-        )
-        self.dut.send_expect(
-            "sed -i -e 's/^.*link LINK1 dev.*$/link LINK1 dev %s/g' %s"
-            % (self.dut_p1_pci, self.new_firmware_cli),
-            "#",
-        )
-        if len(self.dut_ports) == 4:
-            self.dut.send_expect(
-                "sed -i -e 's/^.*link LINK2 dev.*$/link LINK2 dev %s/g' %s"
-                % (self.dut_p2_pci, self.new_firmware_cli),
-                "#",
-            )
-            self.dut.send_expect(
-                "sed -i -e 's/^.*link LINK3 dev.*$/link LINK3 dev %s/g' %s"
-                % (self.dut_p3_pci, self.new_firmware_cli),
-                "#",
-            )
-
-        # table action
-        temp = "table action profile AP0"
-        if caseID == 8:
-            self.dut.send_expect(
-                "sed -i -e 's/^.*%s.*$/%s ipv6 offset 270 fwd meter trtcm tc 1 stats pkts/g' %s"
-                % (temp, temp, self.new_firmware_cli),
-                "#",
-            )
-        else:
-            self.dut.send_expect(
-                "sed -i -e 's/^.*%s.*$/%s ipv4 offset 270 fwd meter trtcm tc 1 stats pkts/g' %s"
-                % (temp, temp, self.new_firmware_cli),
-                "#",
-            )
-
-        # pipeline RX table
-        temp = "pipeline RX table match"
-        if caseID == 7:
-            target = "hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 65K action AP0"
-            self.dut.send_expect(
-                "sed -i -e 's/^.*%s.*$/%s %s/g' %s"
-                % (temp, temp, target, self.new_firmware_cli),
-                "#",
-            )
-        elif caseID == 8:
-            self.dut.send_expect(
-                "sed -i -e 's/^.*%s.*$/%s acl ipv6 offset 270 size 4K action AP0/g' %s"
-                % (temp, temp, self.new_firmware_cli),
-                "#",
-            )
-        else:
-            self.dut.send_expect(
-                "sed -i -e 's/^.*%s.*$/%s acl ipv4 offset 270 size 4K action AP0/g' %s"
-                % (temp, temp, self.new_firmware_cli),
-                "#",
-            )
-        # use .sh file as RX table
-        temp = "pipeline RX table 0 dscp"
-        target_dir = "\/".join(self.target_dir.split("/"))
-        if caseID == 10:
-            self.dut.send_expect(
-                "sed -i -e 's/^.*%s.*$/%s  %s\/drivers\/net\/softnic\/dscp_red.sh/g' %s"
-                % (temp, temp, target_dir, self.new_firmware_cli),
-                "#",
-            )
-        elif caseID == 11:
-            self.dut.send_expect(
-                "sed -i -e 's/^.*%s.*$/%s  %s\/drivers\/net\/softnic\/dscp_yellow.sh/g' %s"
-                % (temp, temp, target_dir, self.new_firmware_cli),
-                "#",
-            )
-        elif caseID == 12:
-            self.dut.send_expect(
-                "sed -i -e 's/^.*%s.*$/%s  %s\/drivers\/net\/softnic\/dscp_green.sh/g' %s"
-                % (temp, temp, target_dir, self.new_firmware_cli),
-                "#",
-            )
-        elif caseID == 13:
-            self.dut.send_expect(
-                "sed -i -e 's/^.*%s.*$/%s  %s\/drivers\/net\/softnic\/dscp_default.sh/g' %s"
-                % (temp, temp, target_dir, self.new_firmware_cli),
-                "#",
-            )
-
-        # thread * pipeline RX/TX enable
-        self.dut.send_expect(
-            "sed -i -e 's/thread 5 pipeline RX enable/thread %d pipeline RX enable/g' %s"
-            % (len(self.dut_ports), self.new_firmware_cli),
-            "#",
-        )
-        self.dut.send_expect(
-            "sed -i -e 's/thread 5 pipeline TX enable/thread %d pipeline TX enable/g' %s"
-            % (len(self.dut_ports), self.new_firmware_cli),
-            "#",
-        )
-
-    def start_testpmd(self, filename):
-        """
-        Start testpmd.
-        """
-        if len(self.dut_ports) == 2:
-            portmask = "0x4"
-            Corelist = [0, 1, 2]
-            Servicecorelist = "0x4"
-        if len(self.dut_ports) == 4:
-            portmask = "0x10"
-            Corelist = [0, 1, 2, 3, 4]
-            Servicecorelist = "0x10"
-        self.path = self.dut.apps_name["test-pmd"]
-        self.pmd_out.start_testpmd(
-            Corelist,
-            "--rxq=%d --txq=%d --portmask=%s --disable-rss"
-            % (self.port_id, self.port_id, portmask),
-            eal_param="-s %s --vdev 'net_softnic0,firmware=%s'"
-            % (Servicecorelist, filename),
-        )
-        if self.nic in ["ICE_25G-E810C_SFP", "ICE_100G-E810C_QSFP"]:
-            self.dut.send_expect("set fwd mac", "testpmd>")
-
-    def add_port_meter_profile(self, profile_id, cbs=400, pbs=500):
-        """
-        Add port meter profile (trTCM rfc2968).
-        """
-        cir = 3125000000
-        pir = 3125000000
-        self.dut.send_expect(
-            "add port meter profile trtcm_rfc2698 %d %d %d %d %d %d 0"
-            % (self.port_id, profile_id, cir, pir, cbs, pbs),
-            "testpmd>",
-        )
-
-    def add_port_meter_policy(
-        self, port_id, policy_id, g_actions, y_actions, r_actions
-    ):
-        """
-        Add port meter policy
-        """
-        gyrd_action_list = [g_actions, y_actions, r_actions]
-
-        for i in range(len(gyrd_action_list)):
-            if gyrd_action_list[i] != "drop":
-                gyrd_action_list[i] = "color type " + gyrd_action_list[i]
-
-        self.dut.send_expect(
-            "add port meter policy %d %d g_actions %s / end y_actions %s / end r_actions %s / end"
-            % (
-                port_id,
-                policy_id,
-                gyrd_action_list[0],
-                gyrd_action_list[1],
-                gyrd_action_list[2],
-            ),
-            "testpmd>",
-        )
-
-    def create_port_meter(self, port_id, mtr_id, profile_id, policy_id, gyrd_action):
-        """
-        Create new meter object for the ethernet device.
-        """
-        self.dut.send_expect(
-            "create port meter %d %d %d %d yes %s"
-            % (port_id, mtr_id, profile_id, policy_id, gyrd_action),
-            "testpmd>",
-        )
-
-    def create_flow_rule(
-        self, ret_id, ip_ver, protocol, spec_id, mtr_id, queue_index_id
-    ):
-        """
-        Create flow rule based on port meter.
-        """
-        if ip_ver == "ipv4":
-            src_mask = "255.255.255.255"
-            dst_mask = "255.255.255.255"
-            src_ip = "1.10.11.12"
-            dst_ip = "2.20.21.22"
-        if ip_ver == "ipv6":
-            src_mask = "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"
-            dst_mask = "0:0:0:0:0:0:0:0"
-            src_ip = "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789"
-            dst_ip = "0:0:0:0:0:0:0:0"
-        protocol = protocol.lower()
-        if protocol == "tcp":
-            proto_id = 6
-        if protocol == "udp":
-            proto_id = 17
-        if protocol == "sctp":
-            proto_id = 132
-
-        out = self.dut.send_expect(
-            "flow create %d group 0 ingress pattern eth / %s proto mask 255 src mask %s dst mask"
-            " %s src spec %s dst spec %s proto spec %d / %s src mask 65535 dst mask 65535 src "
-            "spec %d dst spec %d / end actions meter mtr_id %d / queue index %d / end"
-            % (
-                self.port_id,
-                ip_ver,
-                src_mask,
-                dst_mask,
-                src_ip,
-                dst_ip,
-                proto_id,
-                protocol,
-                spec_id,
-                spec_id,
-                mtr_id,
-                queue_index_id,
-            ),
-            "testpmd>",
-        )
-        if ret_id == 1:
-            self.verify("Flow rule #" in out, "flow create fail")
-        else:
-            self.verify(
-                "METER: Meter already attached to a flow: Invalid argument" in out,
-                "flow create should fail, but NOT failed",
-            )
-
-    def scapy_send_packet(self, ip_ver, protocol, fwd_port, pktsize):
-        """
-        Send a packet to DUT port 0
-        """
-        source_port = self.tester.get_interface(
-            self.tester.get_local_port(self.dut_ports[0])
-        )
-        protocol = protocol.upper()
-        if ip_ver == "ipv4":
-            src_ip = "1.10.11.12"
-            dst_ip = "2.20.21.22"
-            tag = "IP"
-            if protocol == "TCP":
-                proto_str = "proto=6"
-            if protocol == "UDP":
-                proto_str = "proto=17"
-            if protocol == "SCTP":
-                proto_str = "proto=132"
-
-        if ip_ver == "ipv6":
-            src_ip = "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789"
-            dst_ip = "2001::1"
-            tag = "IPv6"
-            if protocol == "TCP":
-                proto_str = "nh=6"
-            if protocol == "UDP":
-                proto_str = "nh=17"
-
-        self.scapyCmds.append(
-            'sendp([Ether(dst="%s")/%s(src="%s",dst="%s",%s)/%s(sport=%d,dport=%d)/Raw(load="P"*%d)], iface="%s")'
-            % (
-                self.dut_p0_mac,
-                tag,
-                src_ip,
-                dst_ip,
-                proto_str,
-                protocol,
-                fwd_port,
-                fwd_port,
-                pktsize,
-                source_port,
-            )
-        )
-        self.scapy_execute()
-
-    def send_packet_and_check(self, ip_ver, protocol, fwd_port, pktsize, expect_port):
-        """
-        Send packet and check the stats. If expect_port == -1, the packet should be dropped.
-        """
-        # check the ports are UP before sending packets
-        res = self.pmd_out.wait_link_status_up("all", 30)
-        self.verify(res is True, "there have port link is down")
-
-        rx_before = []
-        tx_before = []
-        for i in range(0, len(self.dut_ports)):
-            output = self.dut.send_expect("show port stats %d" % (i), "testpmd>")
-            if i == 0:
-                rx_before.append(
-                    re.compile("RX-packets:\s+(.*?)\s+?").findall(output, re.S)
-                )
-            tx_before.append(
-                re.compile("TX-packets:\s+(.*?)\s+?").findall(output, re.S)
-            )
-
-        self.scapy_send_packet(ip_ver, protocol, fwd_port, pktsize)
-
-        rx_after = []
-        tx_after = []
-        for i in range(0, len(self.dut_ports)):
-            output = self.dut.send_expect("show port stats %d" % (i), "testpmd>")
-            if i == 0:
-                rx_after.append(
-                    re.compile("RX-packets:\s+(.*?)\s+?").findall(output, re.S)
-                )
-            tx_after.append(re.compile("TX-packets:\s+(.*?)\s+?").findall(output, re.S))
-
-        rx_packets_port = []
-        tx_packets_port = []
-        temp1 = int(rx_after[0][0]) - int(rx_before[0][0])
-        rx_packets_port.append(temp1)
-        for i in range(0, len(self.dut_ports)):
-            temp2 = int(tx_after[i][0]) - int(tx_before[i][0])
-            tx_packets_port.append(temp2)
-        self.verify(
-            int(rx_packets_port[0]) == 1, "Wrong: port 0 did not recieve any packet"
-        )
-        if expect_port == -1:
-            for i in range(0, len(self.dut_ports)):
-                self.verify(
-                    int(tx_packets_port[i]) == 0, "Wrong: the packet is not dropped"
-                )
-        else:
-            self.verify(
-                int(tx_packets_port[expect_port]) == 1,
-                "Wrong: can't forward packet to port %d " % expect_port,
-            )
-
-    def run_param(self, cbs, pbs, head):
-        """
-        Set cbs, pbs and head; return the packet size
-        """
-        pkt1 = pbs - head + 1
-        pkt2 = pbs - head
-        pkt3 = cbs - head + 1
-        pkt4 = cbs - head
-        pkt_list = [pkt1, pkt2, pkt3, pkt4]
-        return pkt_list
-
-    def run_port_list(self, ip_ver, protocol, fwd_port, pkt_list, port_list):
-        for i in range(len(port_list)):
-            self.send_packet_and_check(
-                ip_ver=ip_ver,
-                protocol=protocol,
-                fwd_port=fwd_port,
-                pktsize=pkt_list[i],
-                expect_port=port_list[i],
-            )
-
-    def set_up_all(self):
-        """
-        Run at the start of each test suite.
-        """
-        # get absolute directory of target source code
-        self.target_dir = (
-            "/root" + self.dut.base_dir[1:]
-            if self.dut.base_dir.startswith("~")
-            else self.dut.base_dir
-        )
-        self.dut_ports = self.dut.get_ports()
-        self.port_nums = 2
-        self.verify(
-            len(self.dut_ports) >= self.port_nums,
-            "Insufficient ports for speed testing",
-        )
-        self.dut_p0_pci = self.dut.get_port_pci(self.dut_ports[0])
-        self.dut_p1_pci = self.dut.get_port_pci(self.dut_ports[1])
-        if len(self.dut_ports) == 4:
-            self.dut_p2_pci = self.dut.get_port_pci(self.dut_ports[2])
-            self.dut_p3_pci = self.dut.get_port_pci(self.dut_ports[3])
-        self.pmd_out = PmdOutput(self.dut)
-        self.dut_p0_mac = self.dut.get_mac_address(self.dut_ports[0])
-        self.port_id = len(self.dut_ports)
-        self.copy_config_files_to_dut()
-        self.start_scapy()
-
-    def set_up(self):
-        """
-        Run before each test case.
-        """
-        pass
-
-    def test_ipv4_ACL_table_RFC2698_GYR(self):
-        """
-        Test Case 1: ipv4 ACL table RFC2698 GYR
-        """
-        self.update_firmware_cli(caseID=1)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=40)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, 0])
-
-    def test_ipv4_ACL_table_RFC2698_GYD(self):
-        """
-        Test Case 2: ipv4 ACL table RFC2698 GYD
-        """
-        self.update_firmware_cli(caseID=2)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=40)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="drop",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [-1, 0, 0, 0])
-
-    def test_ipv4_ACL_table_RFC2698_GDR(self):
-        """
-        Test Case 3: ipv4 ACL table RFC2698 GDR
-        """
-        self.update_firmware_cli(caseID=3)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=32)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="drop",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="sctp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=1,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "sctp", 2, pkt_list, [1, -1, -1, 1])
-
-    def test_ipv4_ACL_table_RFC2698_DYR(self):
-        """
-        Test Case 4: ipv4 ACL table RFC2698 DYR
-        """
-        self.update_firmware_cli(caseID=4)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=28)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="drop",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="udp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "udp", 2, pkt_list, [0, 0, 0, -1])
-
-    def test_ipv4_ACL_table_RFC2698_DDD(self):
-        """
-        Test Case 5: ipv4 ACL table RFC2698 DDD
-        """
-        self.update_firmware_cli(caseID=5)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=40)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="drop",
-            y_actions="drop",
-            r_actions="drop",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [-1, -1, -1, -1])
-
-    def test_ipv4_with_same_cbs_and_pbs_GDR(self):
-        """
-        Test Case 6: ipv4 with same cbs and pbs GDR
-        """
-        self.update_firmware_cli(caseID=6)
-        cbs = 500
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=32)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="drop",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="sctp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "sctp", 2, pkt_list, [0, 0])
-
-    def test_ipv4_HASH_table_RFC2698(self):
-        """
-        Test Case 7: ipv4 HASH table RFC2698
-        """
-        self.update_firmware_cli(caseID=7)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=40)
-
-        # test 1 'g y r 0 0 0'
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, 0])
-        self.dut.send_expect("quit", "#", 30)
-
-        # test 2 'g y d 0 0 0'
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="drop",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [-1, 0, 0, 0])
-        self.dut.send_expect("quit", "#", 30)
-
-        # test 5 'd d d 0 0 0'
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="drop",
-            y_actions="drop",
-            r_actions="drop",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [-1, -1, -1, -1])
-        self.dut.send_expect("quit", "#", 30)
-
-        # test 3 'g d r 0 0 0'
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=32)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="drop",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="sctp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=1,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "sctp", 2, pkt_list, [1, -1, -1, 1])
-        self.dut.send_expect("quit", "#", 30)
-
-        # test 4 'd y r 0 0 0'
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=28)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="drop",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="udp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.dut.send_expect("start", "testpmd>")
-        self.run_port_list("ipv4", "udp", 2, pkt_list, [0, 0, 0, -1])
-        self.dut.send_expect("quit", "#", 30)
-
-    def test_ipv6_ACL_table_RFC2698(self):
-        """
-        Test Case 8: ipv6 ACL table RFC2698
-        """
-        self.update_firmware_cli(caseID=8)
-        cbs = 400
-        pbs = 500
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="drop",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=1,
-            g_actions="drop",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=1, profile_id=0, policy_id=1, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv6",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv6",
-            protocol="udp",
-            spec_id=2,
-            mtr_id=1,
-            queue_index_id=1,
-        )
-        self.dut.send_expect("start", "testpmd>")
-
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=60)
-        self.run_port_list("ipv6", "tcp", 2, pkt_list, [-1, 0, 0, 0])
-
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=48)
-        self.run_port_list("ipv6", "udp", 2, pkt_list, [1, 1, 1, -1])
-
-    def test_ipv4_multiple_meter_and_profile(self):
-        """
-        Test Case 9: multiple meter and profile
-        """
-        self.update_firmware_cli(caseID=9)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=400, pbs=500)
-        self.add_port_meter_profile(profile_id=1, cbs=300, pbs=400)
-
-        gyrd_action_list = [
-            ["green", "yellow", "red"],
-            ["green", "yellow", "drop"],
-            ["green", "drop", "red"],
-            ["drop", "yellow", "red"],
-            ["green", "yellow", "drop"],
-            ["green", "drop", "red"],
-            ["drop", "yellow", "red"],
-            ["drop", "drop", "drop"],
-        ]
-        for i in range(0, len(gyrd_action_list)):
-            self.add_port_meter_policy(
-                self.port_id,
-                policy_id=i,
-                g_actions=gyrd_action_list[i][0],
-                y_actions=gyrd_action_list[i][1],
-                r_actions=gyrd_action_list[i][2],
-            )
-            self.create_port_meter(
-                self.port_id,
-                mtr_id=i,
-                profile_id=i * 2 / len(gyrd_action_list),
-                policy_id=i,
-                gyrd_action="0 0 0",
-            )
-            self.create_flow_rule(
-                ret_id=1,
-                ip_ver="ipv4",
-                protocol="tcp",
-                spec_id=i,
-                mtr_id=i,
-                queue_index_id=i % len(self.dut_ports),
-            )
-        self.create_flow_rule(
-            ret_id=0,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=8,
-            mtr_id=7,
-            queue_index_id=0,
-        )
-
-        self.dut.send_expect("start", "testpmd>")
-        output = self.dut.send_expect("flow list %d" % (self.port_id), "testpmd>")
-        print(output)
-
-        pkt_list = self.run_param(cbs=400, pbs=500, head=40)
-        if len(self.dut_ports) == 4:
-            self.run_port_list("ipv4", "tcp", 0, pkt_list, [0, 0, 0, 0])
-            self.run_port_list("ipv4", "tcp", 1, pkt_list, [-1, 1, 1, 1])
-            self.run_port_list("ipv4", "tcp", 2, pkt_list, [2, -1, -1, 2])
-            self.run_port_list("ipv4", "tcp", 3, pkt_list, [3, 3, 3, -1])
-        if len(self.dut_ports) == 2:
-            self.run_port_list("ipv4", "tcp", 0, pkt_list, [0, 0, 0, 0])
-            self.run_port_list("ipv4", "tcp", 1, pkt_list, [-1, 1, 1, 1])
-            self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, -1, -1, 0])
-            self.run_port_list("ipv4", "tcp", 3, pkt_list, [1, 1, 1, -1])
-
-        pkt_list = self.run_param(cbs=300, pbs=400, head=40)
-        if len(self.dut_ports) == 4:
-            self.run_port_list("ipv4", "tcp", 4, pkt_list, [-1, 0, 0, 0])
-            self.run_port_list("ipv4", "tcp", 5, pkt_list, [1, -1, -1, 1])
-            self.run_port_list("ipv4", "tcp", 6, pkt_list, [2, 2, 2, -1])
-            self.run_port_list("ipv4", "tcp", 7, pkt_list, [-1, -1, -1, -1])
-        if len(self.dut_ports) == 2:
-            self.run_port_list("ipv4", "tcp", 4, pkt_list, [-1, 0, 0, 0])
-            self.run_port_list("ipv4", "tcp", 5, pkt_list, [1, -1, -1, 1])
-            self.run_port_list("ipv4", "tcp", 6, pkt_list, [0, 0, 0, -1])
-            self.run_port_list("ipv4", "tcp", 7, pkt_list, [-1, -1, -1, -1])
-
-    def test_ipv4_RFC2698_pre_colored_red_by_DSCP_table(self):
-        """
-        Test Case 10: ipv4 RFC2698 pre-colored red by DSCP table
-        """
-        self.update_firmware_cli(caseID=10)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=40)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.dut.send_expect("start", "testpmd>")
-
-        # test 0: GYR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, 0])
-
-        # test 1: GYD
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=1,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="drop",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=1, profile_id=0, policy_id=1, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=1,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [-1, -1, -1, -1])
-
-        # test 2: GDR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=2,
-            g_actions="green",
-            y_actions="drop",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=2, profile_id=0, policy_id=2, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=2,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, 0])
-
-        # test 3: DYR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=3,
-            g_actions="drop",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=3, profile_id=0, policy_id=3, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=3,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, 0])
-
-    def test_ipv4_RFC2698_pre_colored_yellow_by_DSCP_table(self):
-        """
-        Test Case 11: ipv4 RFC2698 pre-colored yellow by DSCP table
-        """
-        self.update_firmware_cli(caseID=11)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=40)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.dut.send_expect("start", "testpmd>")
-
-        # test 0: GYR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, 0])
-
-        # test 1: GYD
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=1,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="drop",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=1, profile_id=0, policy_id=1, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=1,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [-1, 0, 0, 0])
-
-        # test 2: GDR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=2,
-            g_actions="green",
-            y_actions="drop",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=2, profile_id=0, policy_id=2, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=2,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, -1, -1, -1])
-
-        # test 3: DYR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=3,
-            g_actions="drop",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=3, profile_id=0, policy_id=3, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=3,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, 0])
-
-    def test_ipv4_RFC2698_pre_colored_green_by_DSCP_table(self):
-        """
-        Test Case 12: ipv4 RFC2698 pre-colored green by DSCP table
-        """
-        self.update_firmware_cli(caseID=12)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=40)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.dut.send_expect("start", "testpmd>")
-
-        # test 0: GYR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, 0])
-
-        # test 1: GYD
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=1,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="drop",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=1, profile_id=0, policy_id=1, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=1,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [-1, 0, 0, 0])
-
-        # test 2: GDR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=2,
-            g_actions="green",
-            y_actions="drop",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=2, profile_id=0, policy_id=2, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=2,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, -1, -1, 0])
-
-        # test 3: DYR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=3,
-            g_actions="drop",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=3, profile_id=0, policy_id=3, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=3,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, -1])
-
-    def test_ipv4_RFC2698_pre_colored_default_by_DSCP_table(self):
-        """
-        Test Case 13: ipv4 RFC2698 pre-colored by default DSCP table
-        """
-        self.update_firmware_cli(caseID=13)
-        cbs = 400
-        pbs = 500
-        pkt_list = self.run_param(cbs=cbs, pbs=pbs, head=40)
-        self.start_testpmd(self.new_firmware_cli)
-        self.add_port_meter_profile(profile_id=0, cbs=cbs, pbs=pbs)
-        self.dut.send_expect("start", "testpmd>")
-
-        # test 0: GYR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=0,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=0, profile_id=0, policy_id=0, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=0,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, 0])
-
-        # test 1: GYD
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=1,
-            g_actions="green",
-            y_actions="yellow",
-            r_actions="drop",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=1, profile_id=0, policy_id=1, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=1,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [-1, 0, 0, 0])
-
-        # test 2: GDR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=2,
-            g_actions="green",
-            y_actions="drop",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=2, profile_id=0, policy_id=2, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=2,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, -1, -1, 0])
-
-        # test 3: DYR
-        self.add_port_meter_policy(
-            self.port_id,
-            policy_id=3,
-            g_actions="drop",
-            y_actions="yellow",
-            r_actions="red",
-        )
-        self.create_port_meter(
-            self.port_id, mtr_id=3, profile_id=0, policy_id=3, gyrd_action="0 0 0"
-        )
-        self.create_flow_rule(
-            ret_id=1,
-            ip_ver="ipv4",
-            protocol="tcp",
-            spec_id=2,
-            mtr_id=3,
-            queue_index_id=0,
-        )
-        self.run_port_list("ipv4", "tcp", 2, pkt_list, [0, 0, 0, -1])
-
-    def tear_down(self):
-        """
-        Run after each test case.
-        """
-        self.dut.kill_all()
-        time.sleep(2)
-
-    def tear_down_all(self):
-        """
-        Run after each test suite.
-        """
-        if self.scapy_status:
-            self.end_scapy()
