diff --git a/dep/flow_classify_softnic.tar.gz b/dep/flow_classify_softnic.tar.gz
deleted file mode 100644
index bbcfe73918dd2eb4efc68ec6662ef610c52bdd7f..0000000000000000000000000000000000000000
GIT binary patch
diff --git a/test_plans/flow_classify_softnic_test_plan.rst b/test_plans/flow_classify_softnic_test_plan.rst
deleted file mode 100644
index f34608e8..00000000
--- a/test_plans/flow_classify_softnic_test_plan.rst
+++ /dev/null
@@ -1,1261 +0,0 @@
-.. SPDX-License-Identifier: BSD-3-Clause
-   Copyright(c) 2017 Intel Corporation
-
-===================================
-Flow classification for softnic PMD
-===================================
-
-Description
-===========
-The SoftNIC allows building custom NIC pipelines in SW. The Soft NIC pipeline is configurable through firmware (DPDK Packet Framework script).
-
-Prerequisites
-=============
-The DUT can have 4*10G Ethernet ports or 2*10G Ethernet ports.
-We design case with 4*10G Ethernet ports.
-The DUT have four 10G Ethernet ports connected to four ports on tester that are controlled by the Scapy packet generator::
-
-    dut_port_0 <---> tester_port_0
-    dut_port_1 <---> tester_port_1
-    dut_port_2 <---> tester_port_2
-    dut_port_3 <---> tester_port_3
-
-Assume four DUT 10G Ethernet ports' pci device id is as the following::
-
-    dut_port_0 : "0000:05:00.0"
-    dut_port_1 : "0000:05:00.1"
-    dut_port_2 : "0000:05:00.2"
-    dut_port_3 : "0000:05:00.3"
-
-Bind them to dpdk igb_uio driver::
-
-    ./usertools/dpdk-devbind.py -b igb_uio 05:00.0 05:00.1 05:00.2 05:00.3
-
-Change ./drivers/net/softnic/firmware.cli to meet the specific test environment.
-Change ports info to your actual ports info::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-    link LINK2 dev 0000:05:00.2
-    link LINK3 dev 0000:05:00.3
-
-Other changes are shown in each case.
-
-Start softnic with following command line::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 \
-    --vdev 'net_softnic0,firmware=./drivers/net/softnic/firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --portmask=0x10
-    testpmd> start
-
-Test Case: ipv4 ACL table
-=========================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv4 offset 270 fwd
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv4_acl_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Validate a rule::
-
-    flow validate 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 0.0.0.0 \
-    dst mask 255.192.0.0 src spec 0.0.0.0 dst spec 2.0.0.0 proto spec 17 / udp src mask \
-    65535 dst mask 65535 src spec 100 dst spec 200 / end actions queue index 3 / end
-
-4. Add rules to table::
-
-    flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 0.0.0.0 \
-    dst mask 255.192.0.0 src spec 0.0.0.0 dst spec 2.0.0.0 proto spec 17 / udp src mask \
-    65535 dst mask 65535 src spec 100 dst spec 200 / end actions queue index 3 / end
-
-    flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 0.0.0.0 \
-    dst mask 255.192.0.0 src spec 0.0.0.0 dst spec 2.64.0.0 proto spec 6 / tcp src mask
-    65535 dst mask 65535 src spec 100 dst spec 200 / end actions queue index 2 / end
-
-    flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.192.0.0 \
-    dst mask 0.0.0.0 src spec 2.128.0.0 dst spec 0.0.0.0 proto spec 132 / sctp src mask \
-    65535 dst mask 65535 src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 0.0.0.0 \
-    dst mask 255.192.0.0 src spec 0.0.0.0 dst spec 4.0.0.0 proto spec 17 / udp src mask \
-    65535 dst mask 65535 src spec 100 dst spec 200 / end actions queue index 0 / end
-    testpmd> start
-
-5. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='0.0.0.0', dst='2.0.0.0',proto=17)/UDP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='0.0.0.0', dst='2.64.0.0',proto=6)/TCP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='2.128.0.0', dst='0.0.0.0',proto=132)/SCTP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='0.0.0.0', dst='4.0.0.0',proto=17)/UDP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='0.0.0.0', dst='3.0.0.0',proto=17)/UDP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='0.0.0.0', dst='2.64.0.0',proto=17)/UDP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='2.128.0.0', dst='0.0.0.0',proto=132)/SCTP(sport=101, dport=200)/('X'*48), iface="enp131s0f3")
-
-   The first 4 packets were forwarded to port3/2/1/0.
-   The last 3 packets weren't forwarded.
-
-6. Query the rule::
-
-    testpmd> flow query 4 3 queue
-    Cannot query action type 6 (QUEUE)
-
-7. destroy and flush the rule::
-
-    testpmd> flow list 4
-    ID      Group   Prio    Attr    Rule
-    0       0       0       i--     ETH IPV4 UDP => QUEUE
-    1       0       0       i--     ETH IPV4 TCP => QUEUE
-    2       0       0       i--     ETH IPV4 SCTP => QUEUE
-    3       0       0       i--     ETH IPV4 UDP => QUEUE
-
-    testpmd> flow destroy 4 rule 1
-    Flow rule #1 destroyed
-    testpmd> flow list 4
-    ID      Group   Prio    Attr    Rule
-    0       0       0       i--     ETH IPV4 UDP => QUEUE
-    2       0       0       i--     ETH IPV4 SCTP => QUEUE
-    3       0       0       i--     ETH IPV4 UDP => QUEUE
-
-8. Send packets, pkt1 to port3, pkt2 can't be forwarded, pkt3 to port1, pkt4 to port0::
-
-    testpmd> flow flush 4
-    testpmd> flow list 4
-
-   No rule listed.
-   Send the first 4 packets, none of them was forwarded.
-
-9. Shutdown the port, the rules will be flushed.
-   Re-add the four rules, then start forward.
-   The first 4 packets can be forwarded to port3/2/1/0.
-   Then::
-
-    testpmd> stop
-    testpmd> port stop 4
-    testpmd> port start 4
-    testpmd> start
-
-   Send the first 4 packets, none of them was forwarded.
-
-Notes: The IPv4 header source address mask must be set from high bits to low bits.
-255.255.192.0 is legal.
-255.192.255.0 is illegal.
-
-Test Case: ipv4-5tuple hash table
-=================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv4 offset 270 fwd
-    pipeline RX table match hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF \
-    offset 278 buckets 16K size 64K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv4_5tuple_hash_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Add rules to table::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 6 / udp src mask \
-    65535 dst mask 65535 src spec 101 dst spec 201 / end actions queue index 3 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 100.0.0.2 dst spec 200.0.0.2 proto spec 17 / udp src mask \
-    65535 dst mask 65535 src spec 102 dst spec 202 / end actions queue index 2 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 100.0.0.3 dst spec 200.0.0.3 proto spec 132 / udp src mask \
-    65535 dst mask 65535 src spec 103 dst spec 203 / end actions queue index 1 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 100.0.0.4 dst spec 200.0.0.4 proto spec 17 / udp src mask \
-    65535 dst mask 65535 src spec 104 dst spec 204 / end actions queue index 0 / end
-
-    testpmd> start
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.1', dst='200.0.0.1',proto=6)/TCP(sport=101, dport=201)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.2', dst='200.0.0.2',proto=17)/UDP(sport=102, dport=202)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.3', dst='200.0.0.3',proto=132)/SCTP(sport=103, dport=203)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.4', dst='200.0.0.4',proto=17)/UDP(sport=104, dport=204)/('X'*48), iface="enp131s0f3")
-
-   The first 4 packets were forwarded to port3/2/1/0.
-   Change any parameter of the 5 tuple, the packet can't forwarded to any port.
-
-Test Case: ipv4-addr hash table
-===============================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv4 offset 270 fwd
-
-a) Match ipv4 src_addr::
-
-    pipeline RX table match hash ext key 8 mask FFFFFFFF00000000 offset 282 buckets 16K size 64K action AP0
-
-b) Match ipv4 dst_addr::
-
-    pipeline RX table match hash ext key 8 mask FFFFFF0000000000 offset 286 buckets 16K size 64K action AP0
-
-c) Match UDP SPORT::
-
-    pipeline RX table match hash ext key 8 mask FFFF000000000000 offset 290 buckets 16K size 64K action AP0
-
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv4_addr_hash_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Add rules to table.
-
-a) Match the table a::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask \
-    255.255.255.255 dst mask 0.0.0.0 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 3 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask \
-    255.255.255.255 dst mask 0.0.0.0 src spec 100.0.0.2 dst spec 200.0.0.1 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 2 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask \
-    255.255.255.255 dst mask 0.0.0.0 src spec 100.0.0.3 dst spec 200.0.0.1 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask \
-    255.255.255.255 dst mask 0.0.0.0 src spec 100.0.0.4 dst spec 200.0.0.1 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 0 / end
-
-b) Match the table b::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 255.255.255.0 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 17 / udp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions queue index 3 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 255.255.255.0 src spec 100.0.0.1 dst spec 200.0.1.1 proto spec 6 / tcp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions queue index 2 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 255.255.255.0 src spec 100.0.0.1 dst spec 200.0.2.1 proto spec 132 / sctp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 255.255.255.0 src spec 100.0.0.1 dst spec 200.0.3.1 / end actions queue index 0 / end
-
-c) Match the table c::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 0.0.0.0 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 17 / udp src mask 65535 \
-    dst mask 0 src spec 100 dst spec 200 / end actions queue index 3 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 0.0.0.0 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 6 / tcp src mask 65535 \
-    dst mask 0 src spec 101 dst spec 200 / end actions queue index 2 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 0.0.0.0 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 132 / sctp src mask 65535 \
-    dst mask 0 src spec 102 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 0.0.0.0 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 17 / udp src mask 65535 \
-    dst mask 0 src spec 103 dst spec 200 / end actions queue index 0 / end
-
-    testpmd> start
-
-   Notes: The added rule must be consistent with the match table format defined in firmware.cli
-
-4. Sent packet, verify the packets were forwarded to the expected ports.
-
-a) Match ipv4 src_addr::
-
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.1', dst='200.0.0.1',proto=6)/TCP(sport=101, dport=201)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.2', dst='200.0.0.2',proto=17)/UDP(sport=102, dport=202)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.3', dst='200.0.0.3',proto=132)/SCTP(sport=103, dport=203)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.4', dst='200.0.0.4')/('X'*48), iface="enp131s0f3")
-
-   The 4 packets were forwarded to port3/2/1/0.
-   Change the ipv4 src address, the packet can't forwarded to any port.
-
-b) Match ipv4 dst_addr::
-
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.1', dst='200.0.0.1',proto=6)/TCP(sport=101, dport=201)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.2', dst='200.0.1.2',proto=17)/UDP(sport=102, dport=202)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.3', dst='200.0.2.3',proto=132)/SCTP(sport=103, dport=203)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.4', dst='200.0.3.4')/('X'*48), iface="enp131s0f3")
-
-   The 4 packets were forwarded to port3/2/1/0.
-   Change the ipv4 first 6 bytes of dst address, the packet can't forwarded to any port.
-
-c) Match sport::
-
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.1', dst='200.0.0.1',proto=6)/TCP(sport=100, dport=201)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.2', dst='200.0.1.2',proto=17)/UDP(sport=101, dport=202)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.3', dst='200.0.2.3',proto=132)/SCTP(sport=102, dport=203)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.2', dst='200.0.1.2',proto=17)/UDP(sport=103, dport=202)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='100.0.0.4', dst='200.0.3.4')/('X'*48), iface="enp131s0f3")
-
-   The first 4 packets were forwarded to port3/2/1/0.
-   The last packet can't forwarded to any port.
-   Change the udp/tcp/sctp sport, the packet can't forwarded to any port.
-
-Test Case: ipv6 ACL table
-=========================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv6 offset 270 fwd
-    pipeline RX table match acl ipv6 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv6_acl_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Add rules to table::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 src \
-    mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:5789 dst spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 3 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 src \
-    mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:6789 dst spec 0:0:0:0:0:0:0:0 proto spec 6 \
-    / tcp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 2 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 src \
-    mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:7789 dst spec 0:0:0:0:0:0:0:0 proto spec 132 \
-    / sctp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 1 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 src \
-    mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:8789 dst spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 65535 dst mask 0 src spec 101 dst spec 0 / end actions queue index 0 / end
-
-    testpmd> start
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789", dst="2001::2",nh=17)/UDP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789", dst="2001::2",nh=6)/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:7789", dst="2001::2",nh=132)/SCTP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789", dst="2001::2",nh=17)/UDP(sport=101, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:9789", dst="2001::2",nh=17)/UDP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789", dst="2001::2",nh=17)/UDP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789", dst="2001::2",nh=17)/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-
-   The first 4 packets were forwarded to port3/2/1/0.
-   The last 3 packets weren't forwarded.
-
-Test Case: ipv6-addr hash table
-===============================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv6 offset 270 fwd
-
-a) Match ipv6 src_addr::
-
-    pipeline RX table match hash ext key 16 mask FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 64K action AP0
-
-b) Match ipv6 dst_addr::
-
-    pipeline RX table match hash ext key 16 mask FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF offset 294 buckets 16K size 64K action AP0
-
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv6_addr_hash_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Add rules to table.
-
-a) Match ipv6 src_addr::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:5789 dst spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 3 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:6789 dst spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 2 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:7789 dst spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 1 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:8789 dst spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 0 / end
-
-b) Match ipv6 dst_addr::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src mask 0:0:0:0:0:0:0:0 \
-    dst spec ABCD:EF01:2345:6789:ABCD:EF01:2345:5789 src spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 3 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src mask 0:0:0:0:0:0:0:0 \
-    dst spec ABCD:EF01:2345:6789:ABCD:EF01:2345:6789 src spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 2 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src mask 0:0:0:0:0:0:0:0 \
-    dst spec ABCD:EF01:2345:6789:ABCD:EF01:2345:7789 src spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 1 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src mask 0:0:0:0:0:0:0:0 \
-    dst spec ABCD:EF01:2345:6789:ABCD:EF01:2345:8789 src spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 0 / end
-
-    testpmd> start
-
-4. Sent packet, verify the packets were forwarded to the expected ports.
-
-a) Match ipv6 src_addr::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789", dst="2001::2")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789", dst="2001::2")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:7789", dst="2001::2")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789", dst="2001::2")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:9789", dst="2001::2")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-
-b) Match ipv6 dst_addr::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:7789")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:9789")/TCP(sport=32, dport=33)/Raw('x'*48), iface="enp131s0f3")
-
-   The first 4 packets were forwarded to port3/2/1/0.
-   The last packet weren't be forwarded to any port.
-
-Test Case: ipv6-5tuple hash table
-=================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv6 offset 270 fwd
-    pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv6_5tuple_hash_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Add rules to table::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 2001::1 dst spec 0::1 proto spec 17 / udp src mask 65535 dst mask 65535 src spec 31 dst spec 41 \
-    / end actions queue index 3 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 2001::2 dst spec 0::2 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 32 dst spec 42
-    / end actions queue index 2 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 2001::3 dst spec 0::3 proto spec 132 / sctp src mask 65535 dst mask 65535 src spec 33 dst spec 43 \
-    / end actions queue index 1 / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 2001::4 dst spec 0::4 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 34 dst spec 44 \
-    / end actions queue index 0 / end
-
-    testpmd> start
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1", dst="0::1")/UDP(sport=31, dport=41)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::2", dst="0::2")/TCP(sport=32, dport=42)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::3", dst="0::3",nh=132)/SCTP(sport=33, dport=43)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::4", dst="0::4")/TCP(sport=34, dport=44)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1", dst="0::1")/TCP(sport=31, dport=41)/Raw('x'*48), iface="enp131s0f3")
-
-   The first 4 packets were forwarded to port3/2/1/0.
-   The last packet weren't be forwarded to any port.
-
-Test Case: ipv4 rule item inconsistent with table match format
-==============================================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv4 offset 270 fwd
-
-a) Match ipv4 src_addr::
-
-    pipeline RX table match hash ext key 8 mask FFFFFFFF00000000 offset 282 buckets 16K size 64K action AP0
-
-b) Match ipv4 dst_addr::
-
-    pipeline RX table match hash ext key 8 mask FFFFFF0000000000 offset 286 buckets 16K size 64K action AP0
-
-   Map the flowapi to softnic table::
-
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv4_addr_hash_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Add rules to table.
-
-a) Map the table a::
-
-    flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 255.255.255.255 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 3 / end
-
-   Error reported, rule item is inconsistent with the table match.
-   Table with hask key mask for src addr, but the rule added is for dst addr.
-
-b) Map the table b::
-
-    flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 \
-    dst mask 255.255.255.255 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 3 / end
-
-   Error reported, rule item is inconsistent with the table match.
-   Table with hask key mask for dst addr 255.255.255.0, but the rule added is 255.255.255.255.
-
-Test Case: ipv6 rule item inconsistent with table match format
-==============================================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv6 offset 270 fwd
-
-a) Match ipv6 5tuple::
-
-    pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-b) Match ipv6 dst_addr::
-
-    pipeline RX table match hash ext key 16 mask FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF offset 294 buckets 16K size 64K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv6_5tuple_hash_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Add rules to table.
-
-a) Map the table a::
-
-    flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 src mask \
-    ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 2001::1 dst spec 0::1 proto spec 17 / udp src mask 0 dst mask 65535 \
-    src spec 31 dst spec 41 / end actions queue index 3 / end
-
-   Error reported, rule item is inconsistent with the table match.
-   Table with hask key mask for 5 tuple, but the rule added mask udp src with 0.
-
-b) Map the table b::
-
-    flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 src mask \
-    ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 src spec \
-    ABCD:EF01:2345:6789:ABCD:EF01:2345:5789 dst spec 0:0:0:0:0:0:0:0 proto spec 17 \
-    / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 3 / end
-
-   Error reported, rule item is inconsistent with the table match.
-   Table with hask key mask for dst addr, but the rule added is for src addr.
-
-Test Case: ipv4 hash table rss action
-=====================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv4 offset 270 fwd balance offset 278 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF outoffset 256
-
-a) Table a::
-
-    pipeline RX table match hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 64K action AP0
-
-b) Table b::
-
-    pipeline RX table match hash ext key 16 mask 00FF0000FFFFFF00FFFFFFFFFFFFFFFF offset 278 buckets 16K size 64K action AP0
-
-c) Table c::
-
-    pipeline RX table match hash ext key 8 mask FFFF0000FFFFFFFF offset 282 buckets 16K size 64K action AP0
-
-   Map the flowapi to softnic table::
-
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv4_rss_firmware.cli,cpu_id=1,conn_port=8086'
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Add rules to table.
-
-a) Map the table a::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.0 dst spec 2.20.21.0 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions rss queues 3 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.1 dst spec 2.20.21.1 proto spec 17 / udp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions rss queues 2 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.2 dst spec 2.20.21.2 proto spec 132 / sctp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions rss queues 1 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.3 dst spec 2.20.21.3 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions rss queues 0 end / end
-
-b) Map the table b::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.0 \
-    dst mask 255.255.255.255 src spec 1.10.11.0 dst spec 2.20.21.0 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions rss queues 0 1 2 3 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.0 \
-    dst mask 255.255.255.255 src spec 1.10.12.0 dst spec 2.20.21.0 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions rss queues 0 1 2 3 end / end
-
-c) Map the table c::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 255.255.0.0 \
-    dst mask  255.255.255.255 src spec 1.10.11.0 dst spec 2.20.21.0 proto spec 6 / tcp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions rss queues 0 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 255.255.0.0 \
-    dst mask  255.255.255.255 src spec 1.10.11.0 dst spec 2.20.21.1 proto spec 6 / tcp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions rss queues 2 3 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 255.255.0.0 \
-    dst mask  255.255.255.255 src spec 2.10.11.0 dst spec 2.20.21.1 proto spec 6 / tcp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions rss queues 1 2 end / end
-
-    testpmd> start
-
-4. Sent packet, verify the packets were forwarded to the expected ports.
-
-a) Match the table a::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.11.0", dst="2.20.21.0")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.11.1", dst="2.20.21.1")/UDP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.11.2", dst="2.20.21.2")/SCTP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.11.3", dst="2.20.21.3")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.11.3", dst="2.20.21.3")/TCP(sport=101, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   The first 4 packets were forwarded to port3/2/1/0.
-   The last packet weren't be forwarded to any port.
-
-b) Match the table b::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.11.0", dst="2.20.21.0")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the src address from 1.10.11.0 to 1.10.11.255, and other parameters keep constant,
-   The packets were distributed from port0 to port3 according to RSS table.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.12.0", dst="2.20.21.0")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the src address from 1.10.12.0 to 1.10.12.255, and other parameters keep constant,
-   The packets were distributed from port0 to port3 according to RSS table.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.13.0", dst="2.20.21.0")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   The packet was not be forwarded to any port.
-
-c) Match the table c::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.11.0", dst="2.20.21.0")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the IP src address from 1.10.0.0 to 1.10.255.255, the packet was forwarded to port0.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.11.0", dst="2.20.21.1")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the IP src address from 1.10.0.0 to 1.10.255.255, or set sport or dport to 0-65535, the packet was forwarded to port2 or port3.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="2.10.11.0", dst="2.20.21.1")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the IP src address from 1.10.0.0 to 1.10.255.255, or set sport or dport to 0-65535, the packet was forwarded to port1 or port2.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="1.10.11.0", dst="2.20.21.2")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   The packet weren't be forwarded to any port.
-
-Test Case: ipv6 hash table rss action
-=====================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below::
-
-    table action profile AP0 ipv6 offset 270 fwd balance offset 274 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 outoffset 256
-
-a) Table a::
-
-    pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0
-
-b) Table b::
-
-    pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0
-
-c) Table c::
-
-    pipeline RX table match hash ext key 64 mask 00000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0
-
-   Map the flowapi to softnic table::
-
-    flowapi map group 0 ingress pipeline RX table 0
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x1f -s 0x10 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv6_rss_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10
-
-3. Add rules to table,
-
-a) Map the table a::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 2001::1 dst spec 0::1 proto spec 17 / udp src mask 65535 dst mask 65535 \
-    src spec 31 dst spec 41 / end actions rss queues 3 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 2001::2 dst spec 0::2 proto spec 6 / tcp src mask 65535 dst mask 65535 \
-    src spec 32 dst spec 42 / end actions rss queues 2 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 2001::3 dst spec 0::3 proto spec 132 / sctp src mask 65535 dst mask 65535 \
-    src spec 33 dst spec 43 / end actions rss queues 1 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 2001::4 dst spec 0::4 proto spec 6 / tcp src mask 65535 dst mask 65535 \
-    src spec 34 dst spec 44 / end actions rss queues 0 end / end
-
-b) Map the table b::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:0 dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:0 dst spec 0::1 proto spec 17 / udp src mask 65535 \
-    dst mask 65535 src spec 31 dst spec 41 / end actions rss queues 0 1 2 3 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:0 dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec ABCD:EF01:2345:6789:ABCD:EF01:2346:0 dst spec 0::1 proto spec 17 / udp src mask 65535 \
-    dst mask 65535 src spec 31 dst spec 41 / end actions rss queues 0 1 2 3 end / end
-
-c) Map the table c::
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:0 \
-    src spec 2001::1 dst spec 1001::1 proto spec 17 / udp src mask 65535 dst mask 65535 \
-    src spec 31 dst spec 41 / end actions rss queues 0 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:0 \
-    src spec 2001::2 dst spec 1001::1 proto spec 6 / tcp src mask 65535 dst mask 65535 \
-    src spec 32 dst spec 42 / end actions rss queues 2 3 end / end
-
-    testpmd> flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:0 \
-    src spec 2001::1 dst spec 2001::3 proto spec 132 / sctp src mask 65535 dst mask 65535 \
-    src spec 33 dst spec 43 / end actions rss queues 1 2 end / end
-
-    testpmd> start
-
-4. Sent packet, verify the packets were forwarded to the expected ports.
-
-a) Match the table a::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1", dst="0::1")/UDP(sport=31, dport=41)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::2", dst="0::2")/TCP(sport=32, dport=42)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::3", dst="0::3",nh=132)/SCTP(sport=33, dport=43)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::4", dst="0::4")/TCP(sport=34, dport=44)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1", dst="0::1")/TCP(sport=31, dport=41)/Raw('x'*48), iface="enp131s0f3")
-
-   The first 4 packets were forwarded to port3/2/1/0.
-   The last packet weren't be forwarded to any port.
-
-b) Match the table b::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:0", dst="0::1")/UDP(sport=31, dport=41)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the src address from ABCD:EF01:2345:6789:ABCD:EF01:2345:0 to ABCD:EF01:2345:6789:ABCD:EF01:2345:FFFF, and other parameters keep constant,
-   The packets were distributed from port0 to port3 according to RSS table.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2346:0", dst="0::1")/UDP(sport=31, dport=41)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the src address from ABCD:EF01:2345:6789:ABCD:EF01:2346:0 to ABCD:EF01:2345:6789:ABCD:EF01:2346:FFFF, and other parameters keep constant,
-   The packets were distributed from port0 to port3 according to RSS table.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2347:0", dst="0::1")/UDP(sport=31, dport=41)/Raw('x'*48), iface="enp131s0f3")
-
-   The packet was not be forwarded to any port.
-
-c) Match the table c::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1", dst="1001::1")/TCP(sport=31, dport=41)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the IPv6 dst address from 1001::0 to 1001::FFFF, the packet was forwarded to port0.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::2", dst="1001::2")/TCP(sport=32, dport=42)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the IPv6 dst address from 1001::0 to 1001::FFFF, the packet was forwarded to port2 or port3.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1", dst="2001::3")/TCP(sport=33, dport=43)/Raw('x'*48), iface="enp131s0f3")
-
-   Set the IPv6 dst address from 2001::0 to 2001::FFFF, the packet was forwarded to port1 or port2.::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="2001::1", dst="0::1")/TCP(sport=31, dport=41)/Raw('x'*48), iface="enp131s0f3")
-
-   The packet weren't be forwarded to any port.
-
-Test Case: ipv4 ACL table jump action
-=====================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below,
-   Just two links::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-
-    table action profile AP0 ipv4 offset 270 fwd
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-    flowapi map group 1 ingress pipeline RX table 1
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv4_acl_jump_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=2 --txq=2 --disable-rss --portmask=0x4
-
-3. Add rules to table::
-
-    testpmd> create 2 group 1 ingress pattern eth / ipv4 proto mask 255 src mask 0.0.0.0 \
-    dst mask 255.192.0.0 src spec 0.0.0.0 dst spec 2.0.0.0 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions queue index 0 / end
-
-    testpmd> create 2 group 1 ingress pattern eth / ipv4 proto mask 255 src mask 0.0.0.0 \
-    dst mask 255.192.0.0 src spec 0.0.0.0 dst spec 2.64.0.0 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions queue index  1 / end
-
-    testpmd> create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 0.0.0.0 \
-    dst mask 255.192.0.0 src spec 0.0.0.0 dst spec 2.0.0.0 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-    testpmd> create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 0.0.0.0 \
-    dst mask 255.192.0.0 src spec 0.0.0.0 dst spec 2.64.0.0 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="0.0.0.0", dst="2.0.0.0")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IP(src="0.0.0.0", dst="2.64.0.0")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   The first packet was forwarded to port 0, the second was forwarded to port 1.
-   If change the TCP sport or dport, the packet can't be forwarded to any port.
-
-Notes: When only set the group 1 rules, the input packets match table 0, which map group 0, while there is no group 0 rule created.
-So the packets can't be forwarded.
-
-Test Case: ipv4 HASH table jump action
-======================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below,
-   Just two links::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-
-    table action profile AP0 ipv4 offset 270 fwd
-    pipeline RX table match hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFF00000000 offset 278 buckets 16K size 64K action AP0
-    pipeline RX table match hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFF00000000 offset 278 buckets 16K size 64K action AP0
-    pipeline RX port in 0 table 0
-    pipeline RX port in 1 table 0
-    flowapi map group 0 ingress pipeline RX table 0
-    flowapi map group 1 ingress pipeline RX table 1
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv4_hash_jump_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=2 --txq=2 --disable-rss --portmask=0x4
-
-3. Add rules to table::
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv4 proto mask 255 \
-    src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.0 dst spec 2.20.21.0 proto spec 6 \
-    / tcp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 0 / end
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv4 proto mask 255 \
-    src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.1 dst spec 2.20.21.1 proto spec 6 \
-    / tcp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 \
-    src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.0 dst spec 2.20.21.0 proto spec 6 \
-    / tcp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 \
-    src mask 255.255.255.255 dst mask 255.255.255.255 src spec 1.10.11.1 dst spec 2.20.21.1 proto spec 6 \
-    / tcp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.0', dst='2.20.21.0',proto=6)/TCP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.1', dst='2.20.21.1',proto=6)/TCP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-
-   The first packet was forwarded to port 0, the second was forwarded to port 1.
-   If change the IPv4 dst address or src address, the packet can't be forwarded to any port.
-
-Notes: when only set the group 1 rules, the input packets match table 0, which map group 0, while there is no group 0 rule created.
-So the packets can't be forwarded.
-
-Test Case: ipv4 ACL jump to HASH table
-======================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below,
-   Just two links::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-
-   Group 0 with ACL table jump to group 1 with HASH table::
-
-    table action profile AP0 ipv4 offset 270 fwd
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    pipeline RX table match hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 64K action AP0
-    pipeline RX port in 0 table 0
-    pipeline RX port in 1 table 0
-    flowapi map group 0 ingress pipeline RX table 0
-    flowapi map group 1 ingress pipeline RX table 1
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv4_acl_hash_jump_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=2 --txq=2 --disable-rss --portmask=0x4
-
-3. Add rules to table::
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.0 dst spec 2.20.21.0 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions queue index 0 / end
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.1 dst spec 2.20.21.1 proto spec 6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.0 dst spec 2.20.21.0 proto spec  6 / tcp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.1 dst spec 2.20.21.1 proto spec  6 / tcp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.0', dst='2.20.21.0',proto=6)/TCP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.1', dst='2.20.21.1',proto=6)/TCP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-
-   The first packet was forwarded to port 0, the second was forwarded to port 1.
-   If change the IPv4 dst address or src address, the packet can't be forwarded to any port::
-
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.0', dst='2.20.21.0',proto=6)/TCP(sport=101, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.1', dst='2.20.21.1',proto=6)/TCP(sport=100, dport=201)/('X'*48), iface="enp131s0f3")
-
-   The two packets can't be forwarded to any port.
-
-Test Case: ipv4 HASH jump to ACL table
-======================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below,
-   Just two links::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-
-   Group 0 with ACL table jump to group 1 with HASH table::
-
-    table action profile AP0 ipv4 offset 270 fwd
-    pipeline RX table match hash ext key 16 mask 00FF0000FFFFFFFFFFFFFF00FFFFFFFF offset 278 buckets 16K size 64K action AP0
-    pipeline RX table match acl ipv4 offset 270 size 4K action AP0
-    pipeline RX port in 0 table 0
-    pipeline RX port in 1 table 0
-    flowapi map group 0 ingress pipeline RX table 0
-    flowapi map group 1 ingress pipeline RX table 1
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv4_hash_acl_jump_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=2 --txq=2 --disable-rss --portmask=0x4
-
-3. Add rules to table::
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.0 dst spec 2.20.21.0 proto spec 6 / tcp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions queue index 0 / end
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.255 src spec 1.10.11.1 dst spec 2.20.21.1 proto spec 6 / tcp src mask 0 \
-    dst mask 0 src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.0 src spec 1.10.11.0 dst spec 2.20.21.0 proto spec  6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv4 proto mask 255 src mask 255.255.255.255 \
-    dst mask 255.255.255.0 src spec 1.10.11.1 dst spec 2.20.21.1 proto spec  6 / tcp src mask 65535 \
-    dst mask 65535 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.0', dst='2.20.21.0',proto=6)/TCP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.1', dst='2.20.21.1',proto=6)/TCP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.0', dst='2.20.21.2',proto=6)/TCP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-    sendp(Ether(dst='00:00:00:00:01:00')/IP(src='1.10.11.1', dst='2.20.21.3',proto=6)/TCP(sport=100, dport=200)/('X'*48), iface="enp131s0f3")
-
-   The first packet was forwarded to port 0, the second was forwarded to port 1.
-   The last two packets can't be forwarded to any ports.
-
-Test Case: ipv6 ACL table jump action
-=====================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below,
-   Just two links::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-
-    table action profile AP0 ipv6 offset 270 fwd
-    pipeline RX table match acl ipv6 offset 270 size 4K action AP0
-    pipeline RX table match acl ipv6 offset 270 size 4K action AP0
-    flowapi map group 0 ingress pipeline RX table 0
-    flowapi map group 1 ingress pipeline RX table 1
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv6_acl_jump_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=2 --txq=2 --disable-rss --portmask=0x4
-
-3. Add rules to table::
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv6 proto mask 255 src mask 0:0:0:0:0:0:0:0 \
-    dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src spec 0::1 dst spec 2001::1 proto spec 6 \
-    / tcp src mask 65535 dst mask 65535 src spec 100 dst spec 200 / end actions queue index 0 / end
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv6 proto mask 255 src mask \
-    ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::1 dst spec 2001::2 proto spec 6 / tcp src mask 65535 dst mask 65535 \
-    src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 src mask 0:0:0:0:0:0:0:0 \
-    dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src spec 0::1 dst spec 2001::1 proto spec 6 \
-    / tcp src mask 65535 dst mask 65535 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 src mask 0:0:0:0:0:0:0:0 \
-    dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src spec 0::1 dst spec 2001::2 proto spec 6 \
-    / tcp src mask 65535 dst mask 65535 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="2001::1")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="2001::2")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::2", dst="2001::1")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::2", dst="2001::2")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   The first packet was forwarded to port 0, the second was forwarded to port 1.
-   The third packet was forwarded to port 0, the fourth packet can't be forwarded to any port.
-
-Notes: When only set the group 1 rules, the input packets match table 0, which map group 0, while there is no group 0 rule created.
-So the packets can't be forwarded.
-
-Test Case: ipv6 HASH table jump action
-======================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below,
-   Just two links::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-
-    table action profile AP0 ipv6 offset 270 fwd
-    pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0
-    pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0
-    pipeline RX port in 0 table 0
-    pipeline RX port in 1 table 0
-    flowapi map group 0 ingress pipeline RX table 0
-    flowapi map group 1 ingress pipeline RX table 1
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv6_hash_jump_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=2 --txq=2 --disable-rss --portmask=0x4
-
-3. Add rules to table::
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::1 dst spec 2001::1 proto spec 6 / tcp src mask 65535 dst mask 65535 \
-    src spec 100 dst spec 200 / end actions queue index 0 / end
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::2 dst spec 2001::2 proto spec 17 / udp src mask 65535 dst mask 65535 \
-    src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::1 dst spec 2001::1 proto spec 6 / tcp src mask 65535 dst mask 65535 \
-    src spec 100 dst spec 200 / end actions jump group 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::2 dst spec 2001::2 proto spec 17 / udp src mask 65535 dst mask 65535 \
-    src spec 100 dst spec 200 / end actions jump group 1 / end
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="2001::1")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::2", dst="2001::2")/UDP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   The first packet was forwarded to port 0, the second was forwarded to port 1.
-   If change the IPv6 dst address or src address, the packet can't be forwarded to any port.
-
-Notes: When only set the group 1 rules, the input packets match table 0, which map group 0, while there is no group 0 rule created.
-So the packets can't be forwarded.
-
-Test Case: ipv6 ACL jump to HASH table
-======================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below,
-   Just two links::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-
-   Group 0 with ACL table jump to group 1 with HASH table::
-
-    table action profile AP0 ipv6 offset 270 fwd
-    pipeline RX table match acl ipv6 offset 270 size 4K action AP0
-    pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0
-    pipeline RX port in 0 table 0
-    pipeline RX port in 1 table 0
-    flowapi map group 0 ingress pipeline RX table 0
-    flowapi map group 1 ingress pipeline RX table 1
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv6_acl_hash_jump_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=2 --txq=2 --disable-rss --portmask=0x4
-
-3. Add rules to table::
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::1 dst spec 2001::1 proto spec 6 / tcp src mask 65535 dst mask 65535 \
-    src spec 100 dst spec 200 / end actions queue index 0 / end
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::2 dst spec 2001::2 proto spec 6 / tcp src mask 65535 dst mask 65535 \
-    src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask 0:0:0:0:0:0:0:0 dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src spec 0::1 \
-    dst spec 2001::1 proto spec 6 / tcp src mask 65535 dst mask 65535 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask 0:0:0:0:0:0:0:0 dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src spec 0::2 dst spec 2001::2 proto spec 6 \
-    / tcp src mask 65535 dst mask 65535 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-4. sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="2001::1")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::2", dst="2001::2")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::3", dst="2001::1")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::4", dst="2001::2")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-
-   The first packet was forwarded to port 0, the second was forwarded to port 1.
-   The last two packets can't be forwarded to any ports.
-
-Test Case: ipv6 HASH jump to ACL table
-======================================
-1. Edit flow_classification_firmware.cli to change "table action" and "pipeline table" as below,
-   Just two links::
-
-    link LINK0 dev 0000:05:00.0
-    link LINK1 dev 0000:05:00.1
-
-   Group 0 with ACL table jump to group 1 with HASH table::
-
-    table action profile AP0 ipv6 offset 270 fwd
-    pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0
-    pipeline RX table match acl ipv6 offset 270 size 4K action AP0
-    pipeline RX port in 0 table 0
-    pipeline RX port in 1 table 0
-    flowapi map group 0 ingress pipeline RX table 0
-    flowapi map group 1 ingress pipeline RX table 1
-
-2. Start softnic::
-
-    ./x86_64-native-linuxapp-gcc/app/dpdk-testpmd -c 0x7 -s 0x4 -n 4 --vdev 'net_softnic0, \
-    firmware=./drivers/net/softnic/flow_ipv6_hash_acl_jump_firmware.cli,cpu_id=1,conn_port=8086' \
-    -- -i --rxq=2 --txq=2 --disable-rss --portmask=0x4
-
-3. Add rules to table::
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv6 proto mask 255 src mask 0:0:0:0:0:0:0:0 \
-    dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src spec 0::1 dst spec 2001::1 proto spec 6 \
-    / tcp src mask 65535 dst mask 65535 src spec 100 dst spec 200 / end actions queue index 0 / end
-
-    testpmd> flow create 2 group 1 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::2 dst spec 2001::2 proto spec 6 / tcp src mask 0 dst mask 65535 src spec 100 dst spec 200 / end actions queue index 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::1 dst spec 2001::1 proto spec 6 / tcp src mask 65535 dst mask 0 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-    testpmd> flow create 2 group 0 ingress pattern eth / ipv6 proto mask 255 \
-    src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff \
-    src spec 0::2 dst spec 2001::2 proto spec 6 / tcp src mask 65535 dst mask 0 src spec 100 dst spec 200 / end actions jump group 1 / end
-
-4. Sent packet, verify the packets were forwarded to the expected ports::
-
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="2001::1")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::2", dst="2001::2")/TCP(sport=100, dport=200)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::1", dst="2001::1")/TCP(sport=100, dport=201)/Raw('x'*48), iface="enp131s0f3")
-    sendp(Ether(dst="00:00:00:00:01:00")/IPv6(src="0::2", dst="2001::2")/TCP(sport=100, dport=202)/Raw('x'*48), iface="enp131s0f3")
-
-   The first packet was forwarded to port 0, the second was forwarded to port 1.
-   The last two packets can't be forwarded to any ports.
diff --git a/test_plans/index.rst b/test_plans/index.rst
index dc782fdf..a47e5eaf 100644
--- a/test_plans/index.rst
+++ b/test_plans/index.rst
@@ -70,7 +70,6 @@ The following are the test plans for the DPDK DTS automated test system.
     external_mempool_handler_test_plan
     firmware_version_test_plan
     floating_veb_test_plan
-    flow_classify_softnic_test_plan
     i40e_rss_input_test_plan
     generic_flow_api_test_plan
     hotplug_mp_test_plan
diff --git a/tests/TestSuite_flow_classify_softnic.py b/tests/TestSuite_flow_classify_softnic.py
deleted file mode 100644
index a3a0eed5..00000000
--- a/tests/TestSuite_flow_classify_softnic.py
+++ /dev/null
@@ -1,3003 +0,0 @@
-# SPDX-License-Identifier: BSD-3-Clause
-# Copyright(c) 2010-2018 Intel Corporation
-#
-
-import os
-import random
-import re
-import time
-from time import sleep
-
-import scapy.layers.inet
-from scapy.arch import get_if_hwaddr
-from scapy.layers.inet import ICMP, IP, TCP, UDP, Ether
-from scapy.layers.inet6 import IPv6
-from scapy.layers.l2 import ARP, GRE, Dot1Q
-from scapy.layers.sctp import SCTP, SCTPChunkData
-from scapy.packet import Raw, bind_layers
-from scapy.route import *
-from scapy.sendrecv import sendp, sniff
-from scapy.utils import hexstr, rdpcap, wrpcap
-
-import framework.utils as utils
-from framework.crb import Crb
-from framework.dut import Dut
-from framework.exception import VerifyFailure
-from framework.packet import Packet
-from framework.pmd_output import PmdOutput
-from framework.project_dpdk import DPDKdut
-from framework.settings import DRIVERS, HEADER_SIZE
-from framework.test_case import TestCase
-from framework.virt_dut import VirtDut
-
-
-class TestFlowClassifySoftnic(TestCase):
-    def copy_config_files_to_dut(self):
-        """
-        Copy firmware.cli from tester to DUT.
-        """
-        file = "flow_classify_softnic.tar.gz"
-        src_file = r"./dep/%s" % file
-        dst1 = "/tmp"
-        dst2 = "/root/dpdk/drivers/net/softnic"
-        self.dut.session.copy_file_to(src_file, dst1)
-        self.dut.send_expect("tar xf %s/%s -C %s" % (dst1, file, dst2), "#", 30)
-
-    def start_testpmd(self, filename, port_num):
-        """
-        Start testpmd.
-        """
-        self.cores = self.dut.get_core_list("all")
-        self.set_ports(filename, port_num)
-        TESTPMD = self.dut.apps_name["test-pmd"]
-        cmd = "cat /sys/bus/pci/devices/%s/numa_node" % self.dut_p0_pci
-        numa_node = int(self.dut.send_expect(cmd, "# ", 60))
-        cpu_id = numa_node if numa_node > 0 else 0
-        ports_info = []
-        for i in range(port_num):
-            ports_info.append(i)
-        eal_params = self.dut.create_eal_parameters(cores=self.cores, ports=ports_info)
-        VDEV = (
-            "--vdev 'net_softnic0,firmware=./drivers/net/softnic/flow_classify_softnic/%s,cpu_id=%s,conn_port=8086'"
-            % (filename, cpu_id)
-        )
-        if port_num == 4:
-            cmd = "{0} {1} {2} -s 0x10 -- -i --rxq=4 --txq=4 --disable-rss --portmask=0x10".format(
-                TESTPMD, VDEV, eal_params
-            )
-        elif port_num == 2:
-            cmd = "{0} {1} {2} -s 0x4 -- -i --rxq=2 --txq=2 --disable-rss --portmask=0x4".format(
-                TESTPMD, VDEV, eal_params
-            )
-        else:
-            raise Exception("The number of port is wrong!")
-        self.dut.send_expect(cmd, "testpmd> ", 60)
-
-    def set_ports(self, filename, port_num):
-        """
-        Set actual ports.
-        """
-        self.dut.send_expect(
-            "sed -i '/^link LINK/d' ./drivers/net/softnic/flow_classify_softnic/%s"
-            % filename,
-            "# ",
-            20,
-        )
-        cmd = (
-            "sed -i '1i\link LINK0 dev %s' ./drivers/net/softnic/flow_classify_softnic/%s"
-            % (self.dut_p0_pci, filename)
-        )
-        self.dut.send_expect(cmd, "# ", 20)
-        cmd = (
-            "sed -i '2i\link LINK1 dev %s' ./drivers/net/softnic/flow_classify_softnic/%s"
-            % (self.dut_p1_pci, filename)
-        )
-        self.dut.send_expect(cmd, "# ", 20)
-        if port_num == 4:
-            cmd = (
-                "sed -i '3i\link LINK2 dev %s' ./drivers/net/softnic/flow_classify_softnic/%s"
-                % (self.dut_p2_pci, filename)
-            )
-            self.dut.send_expect(cmd, "# ", 20)
-            cmd = (
-                "sed -i '4i\link LINK3 dev %s' ./drivers/net/softnic/flow_classify_softnic/%s"
-                % (self.dut_p3_pci, filename)
-            )
-            self.dut.send_expect(cmd, "# ", 20)
-        self.dut.send_expect(
-            "sed -i 's/^thread 4 pipeline/thread %d pipeline/g' ./drivers/net/softnic/flow_classify_softnic/%s"
-            % (self.port_num, filename),
-            "# ",
-            20,
-        )
-
-    def set_table(self, cmd, filename):
-        """
-        Set pipeline table.
-        """
-        self.dut.send_expect(
-            "sed -i '/^pipeline RX table match/d' ./drivers/net/softnic/flow_classify_softnic/%s"
-            % filename,
-            "# ",
-            20,
-        )
-        command = (
-            "sed -i '/^table action/a"
-            + cmd
-            + "' ./drivers/net/softnic/flow_classify_softnic/%s" % filename
-        )
-        self.dut.send_expect(command, "# ", 20)
-
-    def get_flow_direction_param_of_tcpdump(self):
-        """
-        get flow dirction param depend on tcpdump version
-        """
-        param = ""
-        direct_param = r"(\s+)\[ (\S+) in\|out\|inout \]"
-        out = self.tester.send_expect("tcpdump -h", "# ", trim_whitespace=False)
-        for line in out.split("\n"):
-            m = re.match(direct_param, line)
-            if m:
-                opt = re.search("-Q", m.group(2))
-                if opt:
-                    param = "-Q" + " in"
-                else:
-                    opt = re.search("-P", m.group(2))
-                    if opt:
-                        param = "-P" + " in"
-        if len(param) == 0:
-            self.logger.info("tcpdump not support direction choice!!!")
-        return param
-
-    def tcpdump_start_sniff(self, interface, filters=""):
-        """
-        Starts tcpdump in the background to sniff packets that received by interface.
-        """
-        command = "rm -f /tmp/tcpdump_{0}.pcap".format(interface)
-        self.tester.send_expect(command, "#")
-        command = "tcpdump -n -e {0} -w /tmp/tcpdump_{1}.pcap -i {1} {2} 2>/tmp/tcpdump_{1}.out &".format(
-            self.param_flow_dir, interface, filters
-        )
-        self.tester.send_expect(command, "# ")
-
-    def tcpdump_stop_sniff(self):
-        """
-        Stops the tcpdump process running in the background.
-        """
-        self.tester.send_expect("killall tcpdump", "# ")
-        # For the [pid]+ Done tcpdump... message after killing the process
-        sleep(1)
-        self.tester.send_expect('echo "Cleaning buffer"', "# ")
-        sleep(3)
-
-    def write_pcap_file(self, pcap_file, pkts):
-        try:
-            wrpcap(pcap_file, pkts)
-        except:
-            raise Exception("write pcap error")
-
-    def read_pcap_file(self, pcap_file):
-        pcap_pkts = []
-        try:
-            pcap_pkts = rdpcap(pcap_file)
-        except:
-            raise Exception("write pcap error")
-
-        return pcap_pkts
-
-    def send_and_sniff_pkts(self, from_port, to_port, pcap_file, filters="", count=1):
-        """
-        Sent pkts that read from the pcap_file.
-        Return the sniff pkts.
-        """
-        self.pmdout.wait_link_status_up("all")
-        tx_port = self.tester.get_local_port(self.dut_ports[from_port % self.port_num])
-        rx_port = self.tester.get_local_port(self.dut_ports[to_port % self.port_num])
-
-        tx_interface = self.tester.get_interface(tx_port)
-        rx_interface = self.tester.get_interface(rx_port)
-        # check tester's link status before send packet
-        for iface in [tx_interface, rx_interface]:
-            self.verify(
-                self.tester.is_interface_up(intf=iface),
-                "Wrong link status, should be up",
-            )
-
-        self.tcpdump_start_sniff(rx_interface, filters)
-
-        # Prepare the pkts to be sent
-        self.tester.scapy_foreground()
-        self.tester.scapy_append('pkt = rdpcap("%s")' % (pcap_file))
-        self.tester.scapy_append(
-            'sendp(pkt, iface="%s", count=%d)' % (tx_interface, count)
-        )
-        self.tester.scapy_execute()
-
-        self.tcpdump_stop_sniff()
-
-        return self.read_pcap_file("/tmp/tcpdump_%s.pcap" % rx_interface)
-
-    def send_pkts(self, from_port, pcap_file, count=1):
-        """
-        Sent pkts that read from the pcap_file.
-        """
-        tx_port = self.tester.get_local_port(self.dut_ports[from_port])
-        tx_interface = self.tester.get_interface(tx_port)
-
-        # Prepare the pkts to be sent
-        self.tester.scapy_foreground()
-        self.tester.scapy_append('pkt = rdpcap("%s")' % (pcap_file))
-        self.tester.scapy_append(
-            'sendp(pkt, iface="%s", count=%d)' % (tx_interface, count)
-        )
-        self.tester.scapy_execute()
-
-    def send_and_check_packets(
-        self, pcap_file, pkt, ltype, src_dst, addr_port, from_port, to_port
-    ):
-        """
-        Sent pkts that read from the pcap_file.
-        Check if the rule works.
-        """
-        self.write_pcap_file(pcap_file, pkt)
-        checklist = []
-        if ltype in ["udp", "tcp", "sctp"]:
-            filters = "%s %s port %d" % (ltype, src_dst, addr_port)
-            sniff_pkts = self.send_and_sniff_pkts(
-                from_port, to_port, pcap_file, filters
-            )
-            for packet in sniff_pkts:
-                if src_dst == "src":
-                    checklist.append(packet.getlayer(2).sport)
-                elif src_dst == "dst":
-                    checklist.append(packet.getlayer(2).dport)
-        elif ltype in ["ipv4", "ipv6"]:
-            filters = "%s host %s" % (src_dst, addr_port)
-            sniff_pkts = self.send_and_sniff_pkts(
-                from_port, to_port, pcap_file, filters
-            )
-
-            for packet in sniff_pkts:
-                if src_dst == "src":
-                    checklist.append(packet.getlayer(1).src)
-                elif src_dst == "dst":
-                    checklist.append(packet.getlayer(1).dst)
-            addr_port = str.lower(addr_port)
-        self.verify(addr_port in checklist, "rule test fail")
-
-    def check_status(self, rx_pkt_num, tx_pkt_num, port):
-        """
-        Check port status
-        """
-        rx_num = 0
-        tx_num = 0
-        for i in range(port):
-            stats = self.pmdout.get_pmd_stats(self.dut_ports[i])
-            rx_num = rx_num + stats["RX-packets"]
-            tx_num = tx_num + stats["TX-packets"]
-        self.verify(
-            (rx_num == rx_pkt_num) and (tx_num == tx_pkt_num), "The rule failed to work"
-        )
-
-    def generate_rules(
-        self,
-        operation="create",
-        port=4,
-        group=0,
-        iptype="ipv4",
-        src_mask="0.0.0.0",
-        dst_mask="0.0.0.0",
-        src_spec="0.0.0.0",
-        dst_spec="0.0.0.0",
-        protomask=0,
-        protospec=17,
-        l4type="udp",
-        sportmask=0,
-        dportmask=0,
-        sportspec=0,
-        dportspec=0,
-        action="queue",
-        index=[],
-    ):
-        """
-        Generate flow rules
-        """
-        if port == 4:
-            port = self.port_num
-        if iptype == "ipv6":
-            if src_mask == "0.0.0.0":
-                src_mask = "0:0:0:0:0:0:0:0"
-            if dst_mask == "0.0.0.0":
-                dst_mask = "0:0:0:0:0:0:0:0"
-            if src_spec == "0.0.0.0":
-                src_spec = "0:0:0:0:0:0:0:0"
-            if dst_spec == "0.0.0.0":
-                dst_spec = "0:0:0:0:0:0:0:0"
-        if action == "queue":
-            actions = "queue index %d" % (index[0] % port)
-        elif action == "jump":
-            actions = "jump group %d" % (index[0] % port)
-        elif action == "rss":
-            queue_idx = ""
-            for queue in index:
-                queue_idx = queue_idx + str(queue % port) + " "
-            actions = "rss queues %s end" % queue_idx
-
-        if l4type == "":
-            self.dut.send_expect(
-                "flow %s %d group %d ingress pattern eth / %s proto mask %d src mask %s dst mask %s src spec %s dst spec %s / end actions %s / end"
-                % (
-                    operation,
-                    port,
-                    group,
-                    iptype,
-                    protomask,
-                    src_mask,
-                    dst_mask,
-                    src_spec,
-                    dst_spec,
-                    actions,
-                ),
-                operation,
-                60,
-            )
-        else:
-            self.dut.send_expect(
-                "flow %s %d group %d ingress pattern eth / %s proto mask %d src mask %s dst mask %s src spec %s dst spec %s proto spec %d / %s src mask %d dst mask %d src spec %d dst spec %d / end actions %s / end"
-                % (
-                    operation,
-                    port,
-                    group,
-                    iptype,
-                    protomask,
-                    src_mask,
-                    dst_mask,
-                    src_spec,
-                    dst_spec,
-                    protospec,
-                    l4type,
-                    sportmask,
-                    dportmask,
-                    sportspec,
-                    dportspec,
-                    actions,
-                ),
-                operation,
-                60,
-            )
-
-    def send_continuous_packet(self, ptype, src_dst, src_addr, dst_addr, itf):
-        """
-        Sends continuous packets.
-        """
-        self.pmdout.wait_link_status_up("all")
-        self.verify(
-            self.tester.is_interface_up(intf=itf), "Wrong link status, should be up"
-        )
-        self.tester.scapy_foreground()
-        if src_dst == "src":
-            if ptype == "ipv4":
-                var = src_addr.split(".")
-                string = "."
-                ipaddr = string.join(var[0:3])
-                for i in range(32):
-                    packet = (
-                        r'sendp([Ether(dst="%s", src=get_if_hwaddr("%s"))/IP(src="%s.%d", dst="%s", proto=17)/UDP(sport=100, dport=200)], iface="%s")'
-                        % (self.dut_p0_mac, itf, ipaddr, i, dst_addr, itf)
-                    )
-                    self.tester.scapy_append(packet)
-                self.tester.scapy_execute()
-            elif ptype == "ipv6":
-                var = src_addr.split(":")
-                string = ":"
-                if len(var) == 8:
-                    ipaddr = string.join(var[0:7])
-                else:
-                    ipaddr = string.join(var[0 : (len(var) - 1)])
-                for i in range(16):
-                    packet = (
-                        r'sendp([Ether(dst="%s", src=get_if_hwaddr("%s"))/IPv6(src="%s:%d", dst="%s", nh=17)/UDP(sport=100, dport=200)], iface="%s")'
-                        % (self.dut_p0_mac, itf, ipaddr, i, dst_addr, itf)
-                    )
-                    self.tester.scapy_append(packet)
-                self.tester.scapy_execute()
-
-        elif src_dst == "dst":
-            if ptype == "ipv4":
-                var = dst_addr.split(".")
-                string = "."
-                ipaddr = string.join(var[0:3])
-                for i in range(32):
-                    packet = (
-                        r'sendp([Ether(dst="%s", src=get_if_hwaddr("%s"))/IP(src="%s", dst="%s.%d", proto=17)/UDP(sport=100, dport=100)], iface="%s")'
-                        % (self.dut_p0_mac, itf, src_addr, ipaddr, i, itf)
-                    )
-                    self.tester.scapy_append(packet)
-                self.tester.scapy_execute()
-            elif ptype == "ipv6":
-                var = dst_addr.split(":")
-                string = ":"
-                if len(var) == 8:
-                    ipaddr = string.join(var[0:7])
-                else:
-                    ipaddr = string.join(var[0 : (len(var) - 1)])
-                for i in range(16):
-                    packet = (
-                        r'sendp([Ether(dst="%s", src=get_if_hwaddr("%s"))/IPv6(src="%s", dst="%s:%d", nh=17)/UDP(sport=100, dport=200)], iface="%s")'
-                        % (self.dut_p0_mac, itf, src_addr, ipaddr, i, itf)
-                    )
-                    self.tester.scapy_append(packet)
-                self.tester.scapy_execute()
-
-    def check_packet_queue(self, queues=[], out=""):
-        """
-        Get the queue which packet enter.
-        """
-        time.sleep(2)
-        for queue in queues:
-            self.verify(
-                "Queue= %d" % (queue % self.port_num) in out,
-                "There is some queues doesn't work.",
-            )
-        lines = out.split("\r\n")
-        reta_line = {}
-        queue_flag = 0
-        # collect the hash result and the queue id
-        for line in lines:
-            line = line.strip()
-            if queue_flag == 1:
-                result_scanner = r"RX-packets:\s?([0-9]+)"
-                scanner = re.compile(result_scanner, re.DOTALL)
-                m = scanner.search(line)
-                rxpkt_num = m.group(1)
-                result_scanner = r"TX-packets:\s?([0-9]+)"
-                scanner = re.compile(result_scanner, re.DOTALL)
-                m = scanner.search(line)
-                txpkt_num = m.group(1)
-                self.verify(
-                    rxpkt_num == txpkt_num, "There are some packets failed to forward."
-                )
-                queue_flag = 0
-            elif line.strip().startswith("------- Forward"):
-                queue_flag = 1
-
-    def set_up_all(self):
-        """
-        Run at the start of each test suite.
-        """
-        self.dut_ports = self.dut.get_ports()
-        self.port_num = len(self.dut_ports)
-        self.verify(
-            self.port_num == 2 or self.port_num == 4,
-            "Insufficient ports for speed testing",
-        )
-
-        self.dut_p0_pci = self.dut.get_port_pci(self.dut_ports[0])
-        self.dut_p1_pci = self.dut.get_port_pci(self.dut_ports[1])
-        self.dut_p0_mac = self.dut.get_mac_address(self.dut_ports[0])
-        self.dut_p1_mac = self.dut.get_mac_address(self.dut_ports[1])
-        self.pf0_interface = self.dut.ports_info[self.dut_ports[0]]["intf"]
-        self.pf1_interface = self.dut.ports_info[self.dut_ports[1]]["intf"]
-
-        if self.port_num == 4:
-            self.dut_p2_pci = self.dut.get_port_pci(self.dut_ports[2])
-            self.dut_p3_pci = self.dut.get_port_pci(self.dut_ports[3])
-            self.dut_p2_mac = self.dut.get_mac_address(self.dut_ports[2])
-            self.dut_p3_mac = self.dut.get_mac_address(self.dut_ports[3])
-            self.pf2_interface = self.dut.ports_info[self.dut_ports[2]]["intf"]
-            self.pf3_interface = self.dut.ports_info[self.dut_ports[3]]["intf"]
-
-        self.ipv4_mask = "255.255.255.255"
-        self.ipv6_mask = "ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff"
-        self.portmask = 65535
-        self.protomask = 255
-
-        self.pmdout = PmdOutput(self.dut)
-        localPort = self.tester.get_local_port(self.dut_ports[0])
-        self.tester_itf = self.tester.get_interface(localPort)
-        self.copy_config_files_to_dut()
-
-        self.param_flow_dir = self.get_flow_direction_param_of_tcpdump()
-
-    def set_up(self):
-        """
-        Run before each test case.
-        """
-        pass
-
-    def test_ipv4_acl_table(self):
-        """
-        Ipv4 ACL table
-        """
-        filename = "flow_ipv4_acl_firmware.cli"
-        self.start_testpmd(filename, self.port_num)
-
-        # validate rule
-        self.generate_rules(
-            operation="validate",
-            dst_mask="255.192.0.0",
-            dst_spec="2.0.0.0",
-            sportspec=100,
-            dportspec=200,
-            index=[3],
-        )
-
-        # create rule
-        self.generate_rules(
-            dst_mask="255.192.0.0",
-            dst_spec="2.0.0.0",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[3],
-        )
-        self.generate_rules(
-            dst_mask="255.192.0.0",
-            dst_spec="2.64.0.0",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[2],
-        )
-        self.generate_rules(
-            src_mask="255.192.0.0",
-            src_spec="2.128.0.0",
-            protomask=self.protomask,
-            protospec=132,
-            l4type="sctp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            dst_mask="255.192.0.0",
-            dst_spec="4.0.0.0",
-            protomask=self.protomask,
-            sportspec=100,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            dportspec=200,
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="2.0.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "2.0.0.0", 0, 3)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="2.64.0.0", proto=6)
-            / TCP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "2.64.0.0", 0, 2)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="2.128.0.0", dst="0.0.0.0", proto=132)
-            / SCTP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "src", "2.128.0.0", 0, 1)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="4.0.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "4.0.0.0", 0, 0)
-
-        # send another 3 packets
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="3.0.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="2.64.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="2.128.0.0", dst="0.0.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        self.check_status(7, 4, self.port_num)
-
-        # query rule
-        out = self.dut.send_expect("flow query %d 3 queue" % self.port_num, "QUEUE", 60)
-
-        # destroy rule 1
-        self.dut.send_expect(
-            "flow destroy %d rule 1" % self.port_num, "Flow rule #1 destroyed", 60
-        )
-        destroy_out = self.dut.send_expect(
-            "flow list %d" % self.port_num, "testpmd> ", 60
-        )
-        self.verify("1" not in destroy_out, "destroy rule fail")
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="2.64.0.0", proto=6)
-            / TCP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        filters = "dst host 2.64.0.0"
-        sniff_pkts = self.send_and_sniff_pkts(0, 2, pcap_file, filters)
-        dst_ip_list = []
-        for packet in sniff_pkts:
-            dst_ip_list.append(packet.getlayer(1).dst)
-        self.verify("2.64.0.0" not in dst_ip_list, "rule 1 test fail")
-
-        # flush rules
-        self.dut.send_expect("flow flush %d" % self.port_num, "testpmd> ", 60)
-        flush_out = self.dut.send_expect(
-            "flow list %d" % self.port_num, "testpmd> ", 60
-        )
-        self.verify("Rule" not in flush_out, "flush rule fail")
-        self.dut.send_expect("clear port stats all", "testpmd> ", 60)
-
-        # test all the rules
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="2.0.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="2.64.0.0", proto=6)
-            / TCP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="2.128.0.0", dst="0.0.0.0", proto=132)
-            / SCTP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="4.0.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        self.check_status(4, 0, self.port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv4_5tuple_hash_table(self):
-        """
-        Ipv4 5tuple hash table
-        """
-        filename = "flow_ipv4_5tuple_hash_firmware.cli"
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=101,
-            dportspec=201,
-            index=[3],
-        )
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.2",
-            dst_spec="200.0.0.2",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=102,
-            dportspec=202,
-            index=[2],
-        )
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.3",
-            dst_spec="200.0.0.3",
-            protomask=self.protomask,
-            protospec=132,
-            l4type="sctp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=103,
-            dportspec=203,
-            index=[1],
-        )
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.4",
-            dst_spec="200.0.0.4",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=104,
-            dportspec=204,
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.1", dst="200.0.0.1", proto=6)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.0.1", 0, 3)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.2", dst="200.0.0.2", proto=17)
-            / UDP(sport=102, dport=202)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.0.2", 0, 2)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.3", dst="200.0.0.3", proto=132)
-            / SCTP(sport=103, dport=203)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.0.3", 0, 1)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.4", dst="200.0.0.4", proto=17)
-            / UDP(sport=104, dport=204)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.0.4", 0, 0)
-
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv4_addr_hash_table(self):
-        """
-        Ipv4 addr hash table
-        """
-        filename = "flow_ipv4_addr_hash_firmware.cli"
-
-        # match ipv4 src_addr
-        cmd = "pipeline RX table match hash ext key 8 mask FFFFFFFF00000000 offset 282 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            sportspec=100,
-            dportspec=200,
-            index=[3],
-        )
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            src_spec="100.0.0.2",
-            dst_spec="200.0.0.1",
-            sportspec=100,
-            dportspec=200,
-            index=[2],
-        )
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            src_spec="100.0.0.3",
-            dst_spec="200.0.0.1",
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            src_spec="100.0.0.4",
-            dst_spec="200.0.0.1",
-            sportspec=100,
-            dportspec=200,
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.1", dst="200.0.0.1", proto=6)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "src", "100.0.0.1", 0, 3)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.2", dst="200.0.0.2", proto=17)
-            / UDP(sport=102, dport=202)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "src", "100.0.0.2", 0, 2)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.3", dst="200.0.0.3", proto=132)
-            / SCTP(sport=103, dport=203)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "src", "100.0.0.3", 0, 1)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.4", dst="200.0.0.4")
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "src", "100.0.0.4", 0, 0)
-        self.dut.send_expect("quit", "# ", 60)
-
-        # match ipv4 dst_addr
-        cmd = "pipeline RX table match hash ext key 8 mask FFFFFF0000000000 offset 286 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            dst_mask="255.255.255.0",
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            sportspec=100,
-            dportspec=200,
-            index=[3],
-        )
-        self.generate_rules(
-            dst_mask="255.255.255.0",
-            src_spec="100.0.0.1",
-            dst_spec="200.0.1.1",
-            protospec=6,
-            l4type="tcp",
-            sportspec=100,
-            dportspec=200,
-            index=[2],
-        )
-        self.generate_rules(
-            dst_mask="255.255.255.0",
-            src_spec="100.0.0.1",
-            dst_spec="200.0.2.1",
-            protospec=132,
-            l4type="sctp",
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            dst_mask="255.255.255.0",
-            src_spec="100.0.0.1",
-            dst_spec="200.0.3.1",
-            l4type="",
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.1", dst="200.0.0.1", proto=6)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.0.1", 0, 3)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.2", dst="200.0.1.2", proto=17)
-            / UDP(sport=102, dport=202)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.1.2", 0, 2)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.3", dst="200.0.2.3", proto=132)
-            / SCTP(sport=103, dport=203)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.2.3", 0, 1)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.4", dst="200.0.3.4")
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.3.4", 0, 0)
-        self.dut.send_expect("quit", "# ", 60)
-
-        # match sport
-        cmd = "pipeline RX table match hash ext key 8 mask FFFF000000000000 offset 290 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            sportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[3],
-        )
-        self.generate_rules(
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            sportspec=101,
-            dportspec=200,
-            index=[2],
-        )
-        self.generate_rules(
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            protospec=132,
-            l4type="sctp",
-            sportmask=self.portmask,
-            sportspec=102,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            sportmask=self.portmask,
-            sportspec=103,
-            dportspec=200,
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.1", dst="200.0.0.1", proto=6)
-            / TCP(sport=100, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "tcp", "src", 100, 0, 3)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.2", dst="200.0.1.2", proto=17)
-            / UDP(sport=101, dport=202)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "udp", "src", 101, 0, 2)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.3", dst="200.0.2.3", proto=132)
-            / SCTP(sport=102, dport=203)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "sctp", "src", 102, 0, 1)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.2", dst="200.0.1.2", proto=17)
-            / UDP(sport=103, dport=202)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "udp", "src", 103, 0, 0)
-
-        # send a packet without l4 info
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.4", dst="200.0.3.4")
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-        self.check_status(5, 4, self.port_num)
-
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv6_acl_table(self):
-        """
-        Ipv6 acl table
-        """
-        filename = "flow_ipv6_acl_firmware.cli"
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",
-            protomask=self.protomask,
-            index=[3],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            index=[2],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:7789",
-            protomask=self.protomask,
-            protospec=132,
-            l4type="sctp",
-            index=[1],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            sportspec=100,
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789", dst="2001::2", nh=17)
-            / UDP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "src",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",
-            0,
-            3,
-        )
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789", dst="2001::2", nh=6)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "src",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:6789",
-            0,
-            2,
-        )
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:7789", dst="2001::2", nh=132)
-            / SCTP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "src",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:7789",
-            0,
-            1,
-        )
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789", dst="2001::2", nh=17)
-            / UDP(sport=100, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "udp", "src", 100, 0, 0)
-
-        # send another 3 packets
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:9789", dst="2001::2", nh=17)
-            / UDP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789", dst="2001::2", nh=17)
-            / UDP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789", dst="2001::2", nh=17)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        self.check_status(7, 4, self.port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv6_addr_hash_table(self):
-        """
-        Ipv6 addr hash table
-        """
-        filename = "flow_ipv6_addr_hash_firmware.cli"
-
-        # match ipv6 src_addr
-        cmd = "pipeline RX table match hash ext key 16 mask FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",
-            index=[3],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789",
-            index=[2],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:7789",
-            index=[1],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789",
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789", dst="2001::2", nh=6)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "src",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",
-            0,
-            3,
-        )
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789", dst="2001::2", nh=6)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "src",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:6789",
-            0,
-            2,
-        )
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:7789", dst="2001::2", nh=132)
-            / SCTP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "src",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:7789",
-            0,
-            1,
-        )
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789", dst="2001::2", nh=17)
-            / UDP(sport=100, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "src",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:8789",
-            0,
-            0,
-        )
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="ABCD:EF01:2345:6789:ABCD:EF01:2345:9789", dst="2001::2", nh=17)
-            / UDP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-        self.check_status(5, 4, self.port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-        # match ipv6 dst_addr
-        cmd = "pipeline RX table match hash ext key 16 mask FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF offset 294 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            dst_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",
-            index=[3],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            dst_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789",
-            index=[2],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            dst_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:7789",
-            index=[1],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            dst_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789",
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:5789", src="2001::2", nh=6)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "dst",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:5789",
-            0,
-            3,
-        )
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:6789", src="2001::2", nh=6)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "dst",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:6789",
-            0,
-            2,
-        )
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:7789", src="2001::2", nh=132)
-            / SCTP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "dst",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:7789",
-            0,
-            1,
-        )
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:8789", src="2001::2", nh=17)
-            / UDP(sport=100, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(
-            pcap_file,
-            pkt,
-            "ipv6",
-            "dst",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:8789",
-            0,
-            0,
-        )
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(dst="ABCD:EF01:2345:6789:ABCD:EF01:2345:9789", src="2001::2", nh=17)
-            / UDP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-        self.check_status(5, 4, self.port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv6_5tuple_hash_table(self):
-        """
-        Ipv6 5tuple hash table
-        """
-        filename = "flow_ipv6_5tuple_hash_firmware.cli"
-        cmd = "pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="2001::1",
-            dst_spec="0::1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=101,
-            dportspec=201,
-            index=[3],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="2001::2",
-            dst_spec="0::2",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=102,
-            dportspec=202,
-            index=[2],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="2001::3",
-            dst_spec="0::3",
-            protomask=self.protomask,
-            protospec=132,
-            l4type="sctp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=103,
-            dportspec=203,
-            index=[1],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="2001::4",
-            dst_spec="0::4",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=104,
-            dportspec=204,
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::1", dst="0::1", nh=17)
-            / UDP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "src", "2001::1", 0, 3)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::2", dst="0::2", nh=6)
-            / TCP(sport=102, dport=202)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "src", "2001::2", 0, 2)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::3", dst="0::3", nh=132)
-            / SCTP(sport=103, dport=203)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "src", "2001::3", 0, 1)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::4", dst="0::4", nh=17)
-            / UDP(sport=104, dport=204)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "src", "2001::4", 0, 0)
-
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::1", dst="0::1", nh=6)
-            / TCP(sport=101, dport=201)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-        self.check_status(5, 4, self.port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_inconsistent_rules(self):
-        """
-        Flow rule item is inconsistent with table match format
-        """
-        # ipv4
-        filename = "flow_ipv4_addr_hash_firmware.cli"
-        cmd = "pipeline RX table match hash ext key 8 mask FFFFFFFF00000000 offset 282 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.dut.send_expect(
-            "flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 dst mask 255.255.255.255 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 17 / udp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 3 / end",
-            "error",
-            60,
-        )
-        self.dut.send_expect("quit", "# ", 60)
-
-        cmd = "pipeline RX table match hash ext key 8 mask FFFFFF0000000000 offset 286 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-        self.dut.send_expect(
-            "flow create 4 group 0 ingress pattern eth / ipv4 proto mask 0 src mask 0.0.0.0 dst mask 255.255.255.255 src spec 100.0.0.1 dst spec 200.0.0.1 proto spec 17 / udp src mask 0 dst mask 0 src spec 100 dst spec 200 / end actions queue index 3 / end",
-            "error",
-            60,
-        )
-        self.dut.send_expect("quit", "# ", 60)
-
-        # ipv6
-        filename = "flow_ipv6_5tuple_hash_firmware.cli"
-        cmd = "pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-        self.dut.send_expect(
-            "flow create 4 group 0 ingress pattern eth / ipv6 proto mask 255 src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff src spec 2001::1 dst spec 0::1 proto spec 17 / udp src mask 0 dst mask 65535 src spec 31 dst spec 41 / end actions queue index 3 / end",
-            "error",
-            60,
-        )
-        self.dut.send_expect("quit", "# ", 60)
-
-        cmd = "pipeline RX table match hash ext key 16 mask FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF offset 294 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-        self.dut.send_expect(
-            "flow create 4 group 0 ingress pattern eth / ipv6 proto mask 0  src mask ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff dst mask 0:0:0:0:0:0:0:0 src spec ABCD:EF01:2345:6789:ABCD:EF01:2345:5789 dst spec 0:0:0:0:0:0:0:0 proto spec 17 / udp src mask 0 dst mask 0 src spec 0 dst spec 0 / end actions queue index 3 / end",
-            "error",
-            60,
-        )
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv4_hash_rss_action(self):
-        """
-        Set rss action using acl table.
-        """
-        filename = "flow_ipv4_rss_firmware.cli"
-
-        # match ipv4 src_addr
-        cmd = "pipeline RX table match hash ext key 16 mask 00FF0000FFFFFFFFFFFFFFFFFFFFFFFF offset 278 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[3],
-        )
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.2",
-            dst_spec="200.0.0.2",
-            protomask=self.protomask,
-            protospec=17,
-            l4type="udp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[2],
-        )
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.3",
-            dst_spec="200.0.0.3",
-            protomask=self.protomask,
-            protospec=132,
-            l4type="sctp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[1],
-        )
-        self.generate_rules(
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.4",
-            dst_spec="200.0.0.4",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.1", dst="200.0.0.1", proto=6)
-            / TCP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.0.1", 0, 3)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.2", dst="200.0.0.2", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.0.2", 0, 2)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.3", dst="200.0.0.3", proto=132)
-            / SCTP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "src", "100.0.0.3", 0, 1)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.4", dst="200.0.0.4", proto=6)
-            / TCP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.0.4", 0, 0)
-
-        # not match test
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="100.0.0.4", dst="200.0.0.4", proto=6)
-            / TCP(sport=101, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-        self.check_status(5, 4, self.port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-        # match ipv4 src_addr
-        cmd = "pipeline RX table match hash ext key 16 mask 00FF0000FFFFFF00FFFFFFFFFFFFFFFF offset 278 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        self.generate_rules(
-            src_mask="255.255.255.0",
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[0, 1, 2, 3],
-        )
-        self.generate_rules(
-            src_mask="255.255.255.0",
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.1.2",
-            dst_spec="200.0.0.1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[0, 1, 2, 3],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        self.send_continuous_packet(
-            "ipv4", "src", "100.0.0.1", "200.0.0.1", self.tester_itf
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([0, 1, 2, 3], out)
-        self.dut.send_expect("start", "testpmd> ", 120)
-        self.send_continuous_packet(
-            "ipv4", "src", "100.0.1.2", "200.0.0.1", self.tester_itf
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([0, 1, 2, 3], out)
-        self.dut.send_expect("quit", "# ", 60)
-
-        # match ipv4 src_addr
-        cmd = "pipeline RX table match hash ext key 8 mask FFFF0000FFFFFFFF offset 282 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        self.generate_rules(
-            src_mask="255.255.0.0",
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.1",
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[0],
-        )
-        self.generate_rules(
-            src_mask="255.255.0.0",
-            dst_mask=self.ipv4_mask,
-            src_spec="100.0.0.1",
-            dst_spec="200.0.0.2",
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[2, 3],
-        )
-        self.generate_rules(
-            src_mask="255.255.0.0",
-            dst_mask=self.ipv4_mask,
-            src_spec="200.0.0.1",
-            dst_spec="200.0.0.2",
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[1, 2],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        self.send_continuous_packet(
-            "ipv4", "src", "100.0.0.1", "200.0.0.1", self.tester_itf
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([0], out)
-        self.dut.send_expect("start", "testpmd> ", 120)
-        self.send_continuous_packet(
-            "ipv4", "src", "100.0.1.1", "200.0.0.2", self.tester_itf
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([2, 3], out)
-        self.dut.send_expect("start", "testpmd> ", 120)
-        self.send_continuous_packet(
-            "ipv4", "src", "200.0.0.1", "200.0.0.2", self.tester_itf
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([1, 2], out)
-
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv6_hash_rss_action(self):
-        """
-        Set rss action using hash table.
-        """
-        filename = "flow_ipv6_rss_firmware.cli"
-
-        # match ipv6 src_addr
-        cmd = "pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="2001::1",
-            dst_spec="1001::1",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[3],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="2001::2",
-            dst_spec="1001::2",
-            protomask=self.protomask,
-            protospec=17,
-            l4type="udp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[2],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="2001::3",
-            dst_spec="1001::3",
-            protomask=self.protomask,
-            protospec=132,
-            l4type="sctp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[1],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="2001::4",
-            dst_spec="1001::4",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[0],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::1", dst="1001::1", nh=6)
-            / TCP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "1001::1", 0, 3)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::2", dst="1001::2", nh=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "1001::2", 0, 2)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::3", dst="1001::3", nh=132)
-            / SCTP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "1001::3", 0, 1)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::4", dst="1001::4", nh=6)
-            / TCP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "1001::4", 0, 0)
-
-        # not match test
-        pcap_file = "/tmp/route_4.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="2001::1", dst="1001::1", nh=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-        self.check_status(5, 4, self.port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-        cmd = "pipeline RX table match hash ext key 64 mask 0000FF00FFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask="ffff:ffff:ffff:ffff:ffff:ffff:ffff:0",
-            dst_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2345:0",
-            dst_spec="0::1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[0, 1, 2, 3],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask="ffff:ffff:ffff:ffff:ffff:ffff:ffff:0",
-            dst_mask=self.ipv6_mask,
-            src_spec="ABCD:EF01:2345:6789:ABCD:EF01:2346:0",
-            dst_spec="0::1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[0, 1, 2, 3],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        self.send_continuous_packet(
-            "ipv6",
-            "src",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2345:0",
-            "0::1",
-            self.tester_itf,
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([0, 1, 2, 3], out)
-        self.dut.send_expect("start", "testpmd> ", 120)
-        self.send_continuous_packet(
-            "ipv6",
-            "src",
-            "ABCD:EF01:2345:6789:ABCD:EF01:2346:0",
-            "0::1",
-            self.tester_itf,
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([0, 1, 2, 3], out)
-        self.dut.send_expect("quit", "# ", 60)
-
-        cmd = "pipeline RX table match hash ext key 64 mask 00000000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF0000FFFFFFFF000000000000000000000000000000000000000000000000 offset 274 buckets 16K size 64K action AP0"
-        self.set_table(cmd, filename)
-        self.start_testpmd(filename, self.port_num)
-
-        # create rule
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask="ffff:ffff:ffff:ffff:ffff:ffff:ffff:0",
-            src_spec="2001::1",
-            dst_spec="1001::1",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[0],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask="ffff:ffff:ffff:ffff:ffff:ffff:ffff:0",
-            src_spec="2001::2",
-            dst_spec="1001::1",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[2, 3],
-        )
-        self.generate_rules(
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask="ffff:ffff:ffff:ffff:ffff:ffff:ffff:0",
-            src_spec="2001::1",
-            dst_spec="1002::1",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="rss",
-            index=[1, 2],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        self.send_continuous_packet(
-            "ipv6", "dst", "2001::1", "1001::1", self.tester_itf
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([0], out)
-        self.dut.send_expect("start", "testpmd> ", 120)
-        self.send_continuous_packet(
-            "ipv6", "dst", "2001::2", "1001::1", self.tester_itf
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([2, 3], out)
-        self.dut.send_expect("start", "testpmd> ", 120)
-        self.send_continuous_packet(
-            "ipv6", "dst", "2001::1", "1002::1", self.tester_itf
-        )
-        out = self.dut.send_expect("stop", "testpmd> ", 120)
-        self.check_packet_queue([1, 2], out)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv4_acl_jump(self):
-        """
-        Set jump action using acl table.
-        """
-        filename = "flow_ipv4_acl_jump_firmware.cli"
-        port_num = 2
-        self.start_testpmd(filename, port_num)
-
-        # create rule
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            dst_mask="255.192.0.0",
-            dst_spec="200.0.0.0",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[0],
-        )
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            dst_mask="255.192.0.0",
-            dst_spec="200.64.0.0",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            dst_mask="255.192.0.0",
-            dst_spec="200.0.0.0",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            dst_mask="255.192.0.0",
-            dst_spec="200.64.0.0",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="200.0.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.0.0.0", 0, 0)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="200.64.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "200.64.0.0", 0, 1)
-
-        # destroy rules of group 1
-        self.dut.send_expect("flow destroy 2 rule 0", "testpmd> ", 60)
-        self.dut.send_expect("flow destroy 2 rule 1", "testpmd> ", 60)
-        destroy_out = self.dut.send_expect("flow list 2", "testpmd> ", 60)
-        self.verify("QUEUE" not in destroy_out, "destroy rule fail")
-
-        # rule 2 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="0.0.0.0", dst="200.0.0.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        filters = "dst host 200.0.0.0"
-        sniff_pkts = self.send_and_sniff_pkts(0, 0, pcap_file, filters)
-        dst_ip_list = []
-        for packet in sniff_pkts:
-            dst_ip_list.append(packet.getlayer(1).dst)
-        self.verify("200.0.0.0" not in dst_ip_list, "rule 2 test fail")
-
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv4_hash_jump(self):
-        """
-        Set jump action using hash table.
-        """
-        filename = "flow_ipv4_hash_jump_firmware.cli"
-        port_num = 2
-        self.start_testpmd(filename, port_num)
-
-        # create rule
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.0",
-            dst_spec="2.20.21.0",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            index=[0],
-        )
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.1",
-            dst_spec="2.20.21.1",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.0",
-            dst_spec="2.20.21.0",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.1",
-            dst_spec="2.20.21.1",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.0", dst="2.20.21.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "2.20.21.0", 0, 0)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.1", dst="2.20.21.1", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "2.20.21.1", 0, 1)
-
-        # destroy rules of group 1
-        self.dut.send_expect("flow destroy 2 rule 0", "Flow rule #0 destroyed", 60)
-        self.dut.send_expect("flow destroy 2 rule 1", "Flow rule #1 destroyed", 60)
-        destroy_out = self.dut.send_expect("flow list 2", "testpmd> ", 60)
-        self.verify("QUEUE" not in destroy_out, "destroy rule fail")
-
-        # rule 2 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.1", dst="2.20.21.1", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        filters = "dst host 2.20.21.1"
-        sniff_pkts = self.send_and_sniff_pkts(0, 1, pcap_file, filters)
-        dst_ip_list = []
-        for packet in sniff_pkts:
-            dst_ip_list.append(packet.getlayer(1).dst)
-        self.verify("2.20.21.1" not in dst_ip_list, "rule 3 test fail")
-
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv4_acl_hash_jump(self):
-        """
-        Set jump action from acl table to hash table.
-        """
-        filename = "flow_ipv4_acl_hash_jump_firmware.cli"
-        port_num = 2
-        self.start_testpmd(filename, port_num)
-
-        # create rule
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.0",
-            dst_spec="2.20.21.0",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[0],
-        )
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.1",
-            dst_spec="2.20.21.1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.0",
-            dst_spec="2.20.21.0",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.1",
-            dst_spec="2.20.21.1",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.0", dst="2.20.21.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "2.20.21.0", 0, 0)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.1", dst="2.20.21.1", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "2.20.21.1", 0, 1)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.0", dst="2.20.21.0", proto=17)
-            / UDP(sport=101, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.1", dst="2.20.21.1", proto=17)
-            / UDP(sport=100, dport=201)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        self.check_status(4, 2, port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv4_hash_acl_jump(self):
-        """
-        Set jump action from hash table to acl table.
-        """
-        filename = "flow_ipv4_hash_acl_jump_firmware.cli"
-        port_num = 2
-        self.start_testpmd(filename, port_num)
-
-        # create rule
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.0",
-            dst_spec="2.20.21.0",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            index=[0],
-        )
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            src_mask=self.ipv4_mask,
-            dst_mask=self.ipv4_mask,
-            src_spec="1.10.11.1",
-            dst_spec="2.20.21.1",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            src_mask=self.ipv4_mask,
-            dst_mask="255.255.255.0",
-            src_spec="1.10.11.0",
-            dst_spec="2.20.21.0",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            src_mask=self.ipv4_mask,
-            dst_mask="255.255.255.0",
-            src_spec="1.10.11.1",
-            dst_spec="2.20.21.1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.0", dst="2.20.21.0", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "2.20.21.0", 0, 0)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.1", dst="2.20.21.1", proto=17)
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv4", "dst", "2.20.21.1", 0, 1)
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.0", dst="2.20.21.2", proto=17)
-            / UDP(sport=101, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        # rule 3 test
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IP(src="1.10.11.1", dst="2.20.21.3", proto=17)
-            / UDP(sport=100, dport=201)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        self.check_status(4, 2, port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv6_acl_jump(self):
-        """
-        Set jump action with ipv6 acl table.
-        """
-        filename = "flow_ipv6_acl_jump_firmware.cli"
-        port_num = 2
-        self.start_testpmd(filename, port_num)
-
-        # create rule
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[0],
-        )
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::2",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::1",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::2",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::1", dst="2001::1")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "2001::1", 0, 0)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::1", dst="2001::2")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "2001::2", 0, 1)
-
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::2", dst="2001::1")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "2001::1", 0, 0)
-
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::2", dst="2001::2")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        self.check_status(4, 3, port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv6_hash_jump(self):
-        """
-        Set jump action with ipv6 hash table.
-        """
-        filename = "flow_ipv6_hash_jump_firmware.cli"
-        port_num = 2
-        self.start_testpmd(filename, port_num)
-
-        # create rule
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[0],
-        )
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::2",
-            dst_spec="2001::2",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::2",
-            dst_spec="2001::2",
-            protomask=self.protomask,
-            protospec=6,
-            l4type="tcp",
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::1", dst="2001::1")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "2001::1", 0, 0)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::2", dst="2001::2")
-            / TCP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "2001::2", 0, 1)
-
-        # destroy rules of group 1
-        self.dut.send_expect("flow destroy 2 rule 0", "Flow rule #0 destroyed", 60)
-        self.dut.send_expect("flow destroy 2 rule 1", "Flow rule #1 destroyed", 60)
-        destroy_out = self.dut.send_expect("flow list 2", "testpmd> ", 60)
-        self.verify("QUEUE" not in destroy_out, "destroy rule fail")
-
-        # rule 2 test
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::1", dst="2001::1")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        filters = "dst host 2001::1"
-        sniff_pkts = self.send_and_sniff_pkts(0, 0, pcap_file, filters)
-        dst_ip_list = []
-        for packet in sniff_pkts:
-            dst_ip_list.append(packet.getlayer(1).dst)
-        self.verify("2001::1" not in dst_ip_list, "rule 2 test fail")
-
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv6_acl_hash_jump(self):
-        """
-        Set jump action from ipv6 acl table to hash table.
-        """
-        filename = "flow_ipv6_acl_hash_jump_firmware.cli"
-        port_num = 2
-        self.start_testpmd(filename, port_num)
-
-        # create rule
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[0],
-        )
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::2",
-            dst_spec="2001::2",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::1",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::2",
-            dst_spec="2001::2",
-            protomask=self.protomask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::1", dst="2001::1")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "2001::1", 0, 0)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::2", dst="2001::2")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "2001::2", 0, 1)
-
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::3", dst="2001::1")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::4", dst="2001::2")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        self.check_status(4, 2, port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def test_ipv6_hash_acl_jump(self):
-        """
-        Set jump action from ipv6 hash table to acl table.
-        """
-        filename = "flow_ipv6_hash_acl_jump_firmware.cli"
-        port_num = 2
-        self.start_testpmd(filename, port_num)
-
-        # create rule
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            iptype="ipv6",
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[0],
-        )
-        self.generate_rules(
-            port=port_num,
-            group=1,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::2",
-            dst_spec="2001::2",
-            protomask=self.protomask,
-            dportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::1",
-            dst_spec="2001::1",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.generate_rules(
-            port=port_num,
-            iptype="ipv6",
-            src_mask=self.ipv6_mask,
-            dst_mask=self.ipv6_mask,
-            src_spec="1001::2",
-            dst_spec="2001::2",
-            protomask=self.protomask,
-            sportmask=self.portmask,
-            sportspec=100,
-            dportspec=200,
-            action="jump",
-            index=[1],
-        )
-        self.dut.send_expect("start", "testpmd> ", 60)
-
-        # rule 0 test
-        pcap_file = "/tmp/route_0.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::1", dst="2001::1")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "2001::1", 0, 0)
-
-        # rule 1 test
-        pcap_file = "/tmp/route_1.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::2", dst="2001::2")
-            / UDP(sport=100, dport=200)
-            / ("X" * 48)
-        ]
-        self.send_and_check_packets(pcap_file, pkt, "ipv6", "dst", "2001::2", 0, 1)
-
-        pcap_file = "/tmp/route_2.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::1", dst="2001::1")
-            / UDP(sport=100, dport=201)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        pcap_file = "/tmp/route_3.pcap"
-        pkt = [
-            Ether(dst=self.dut_p0_mac)
-            / IPv6(src="1001::2", dst="2001::2")
-            / UDP(sport=100, dport=202)
-            / ("X" * 48)
-        ]
-        self.write_pcap_file(pcap_file, pkt)
-        self.send_pkts(0, pcap_file)
-
-        self.check_status(4, 2, port_num)
-        self.dut.send_expect("quit", "# ", 60)
-
-    def tear_down(self):
-
-        """
-        Run after each test case.
-        """
-        self.dut.kill_all()
-
-    def tear_down_all(self):
-        """
-        Run after each test suite.
-        """
-        pass
