diff mbox series

[V2,3/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3

Message ID 20221110053358.437591-3-weiyuanx.li@intel.com (mailing list archive)
State Superseded
Headers
Series [V2,1/8] test_plans/vlan: modify script and test plan to support i40e fimware > 8.3 |

Commit Message

Weiyuan Li Nov. 10, 2022, 5:33 a.m. UTC 
  Modify script and test plan to i40e support fimware > 8.3.
When the fimrware > 8.3, if the filter is to take effect need to enable
extend.

Signed-off-by: Weiyuan Li <weiyuanx.li@intel.com>
---

v2:
-use the firmware version to judge whether to add command `extend on`.

 test_plans/vlan_test_plan.rst | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/test_plans/vlan_test_plan.rst b/test_plans/vlan_test_plan.rst
index 6e2bf74e..442e4efe 100644
--- a/test_plans/vlan_test_plan.rst
+++ b/test_plans/vlan_test_plan.rst
@@ -61,6 +61,10 @@  Enable the receipt of VLAN packets with VLAN Tag Identifier 1 on port 0::
 
   testpmd> rx_vlan add 1 0
   testpmd> vlan set strip off 0
+  
+  if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to make the single VLAN filter work normally:
+  testpmd> vlan set extend on 0
+  
   testpmd> start
     rxonly packet forwarding - CRC stripping disabled - packets/burst=32
     nb forwarding cores=1 - nb forwarding ports=10
@@ -111,7 +115,10 @@  Test Case: Disable receipt of VLAN packets
 Disable the receipt of VLAN packets with Tag Identifier ``1`` on port 0.
 Send VLAN packets with the Tag Identifier ``1`` check that no packet is received
 on port ``B``, meaning that VLAN packets are now dropped on port 0::
-
+  
+  if the i40e firmware version >= 8.4 the dpdk can only add 'extend on' to make the single VLAN filter work normally:
+  testpmd> vlan set extend on 0
+  
   testpmd> rx_vlan rm 1 0
   testpmd> start
   rxonly packet forwarding - CRC stripping disabled - packets/burst=32